Car Parts Guide
REAR SPRINGS Hyundai i10 · PARTS GUIDE

Hyundai i10 Rear Springs: Specs, Fitment & Common Faults

Worth confirming first: drivetrain and left/right side both affect which rear spring fits.

Hyundai i10 (2014-2019) rear coil spring, free length 300 mm, aftermarket Monroe SP4332 Illustration for editorial purposes
Find Hyundai i10 Rear Springs Here!

Opens live listings in a new tab.

OEM Part Number: confirm via VIN

Aftermarket coils: Monroe SP4332 / Sachs 992234

Accuracy note: Covers the Hyundai i10 (2014-2019) as listed in the UK aftermarket catalogues. Rear coil springs are sold as a pair for the axle and should be replaced as a pair, because a new spring beside a tired one leaves the car sitting unevenly. The right spring depends on the engine and gearbox, the suspension type (standard, sport or heavy-duty) and, on some cars, the body style. The references below are UK aftermarket catalogue listings for this generation, labelled by brand with the fitment details the catalogue gives; carmakers rarely publish the genuine number against these, so match a genuine spring against your VIN if you want a guaranteed fit. Rear springs are sold in left/right pairs matched to a specific rate marking — confirm the marking on your existing spring rather than assuming from trim alone.
Rear coil springs (aftermarket)Monroe SP4332 (300 mm); Sachs 992234 (standard, 320 mm); Suplex 12209 (standard, 320 mm); Kamoka 2120477
Genuine (OE) numbers quotedNone quoted in the catalogue listings — the genuine spring varies by engine, suspension type and body style, so order it against your VIN
Front-wheel drive, standard ratea different spring from the AWD version below — confirm drivetrain and side before ordering
AWDA different spring from the front-wheel-drive version, reflecting the different rear axle layout

The Hyundai i10's rear springs should always go in as a pair — fitting one new spring alongside an old, sagged one on the opposite side leaves the car sitting unevenly and biases how it handles.

Rust and fatigue in the i10's coils

On the Hyundai i10, rear spring sag tends to creep in gradually over months, with little more than a slightly lower ride height to show for it, before ending suddenly at the coil's end with an audible clunk — worth remembering if one rear corner starts sitting noticeably lower than the other.

Before you buy: drivetrain, trim, and left/right side all affect spring rate and fitment. Always confirm against your VIN before ordering.
Watch: replacing them

🎬 Watch: Hyundai i10 rear spring replacement 2

Watch on YouTube ↗
Hyundai i10 Rear Springs reference plate

Ride height, load and the i10's coil springs

On the Hyundai i10, supporting the rear end's weight and absorbing the first impact of a bump is the rear coil spring's job, working alongside the shock absorber rather than doing its job for it. A sagged or broken spring drops ride height, can throw off headlight aim, and in serious cases fails an MOT outright.

Find Hyundai i10 Rear Springs Here!

Opens live listings in a new tab.

Signs of a broken coil on the i10, the DIY job and quality brands

These are the same regardless of make or model — see our full Rear Springs Guide for symptoms of a failing spring, confirming fitment against your VIN, and OEM vs aftermarket guidance.

The same part on other models

The same part, covered across other Hyundai models.