Car Parts Guide
BRAKE PADS Hyundai i30 · PARTS GUIDE

Hyundai i30 Brake Pads: Specs, Fitment & Wear Symptoms

On the i30, if EPB-equipped, rear parking brakes can seize after just a year of inactivity.

Hyundai i30 (2017 ON) brake pads, aftermarket Brembo P 30 073 Illustration for editorial purposes
Find Hyundai i30 Brake Pads Here!

Opens live listings in a new tab.

OEM Part Number: confirm via VIN — front pads (aftermarket) Brembo P 30 073 / Bosch 0 986 424 862

Accuracy note: Covers the Hyundai i30 (2017-) as listed in the UK aftermarket catalogues. Front brake pads are sold by caliper system (ATE / Teves, TRW / Lucas, Bosch, Akebono, Brembo etc.) and by pad size, and one model usually has two or three pad sizes depending on engine, brake size and trim — a wrong size will not fit the caliper. The references below are UK aftermarket catalogue listings for this generation, labelled by brand with their width x height x thickness in mm; genuine numbers are shown only where a listing quotes one. Measure the old pad or check the caliper system against your VIN before ordering, and fit a new wear sensor where the set is only 'prepared for' one.
Front brake pads (aftermarket)Brembo P 30 073 (133 x 60 x 18 mm, acoustic wear warning, Bosch); Brembo P 30 102 (141 x 61 x 20 mm, acoustic wear warning, Galfer); Brembo P 30 110 (149 x 59 x 18/20 mm, acoustic wear warning); ATE 13.0460-5510.2 (148.8 x 59.5 x 19.6 mm, acoustic wear warning, Mobis); Bosch 0 986 424 862 (148.9 x 59.2 x 19.6 mm, integrated wear sensor); TRW GDB3461 (137.8 x 61 x 16.6 mm, acoustic wear warning)
Pad sizes & variantsThree front sizes are listed: about 133 x 60 mm (Brembo P 30 073, Bosch brakes), about 141 x 61 mm (Brembo P 30 102, Galfer brakes) and about 149 x 59 mm (Brembo P 30 110, ATE 13.0460-5510.2, Bosch 0 986 424 862). The right size depends on the brakes and engine fitted, so check the existing pads.
Genuine (OE) numbers quotedNone quoted in catalogue listings — order genuine pads against your VIN
Fitment notesOnly the Bosch 0 986 424 862 has an integrated wear sensor; the other sets use an acoustic wear warning, and the TRW GDB3461 is not confirmed as front-only.

What inactivity does to the rear pads on Hyundai's i30

If your car has an electronic parking brake and sits unused for extended periods, documented cases have seen rear parking brakes seize completely after as little as a year of inactivity, to the point where the EPB needs to be put into a specific service mode just to retract the caliper pistons before pad replacement is possible.

The electronic parking brake is only automatically applied when parking if Auto Hold is enabled — if you don't use this feature, the EPB won't engage automatically just from selecting Park.

Also, a faint, intermittent squeak at low speed near a complete stop is often just normal friction from pads designed to lightly touch the disc to clear water and debris.

One of the few truly universal parts

Every version of the i30 uses brake pads that wear down through normal use — the only real variable is how quickly, which depends on engine, trim, and (where fitted) whether the car has any form of regenerative braking to ease the load.

Watch: replacing them

🎬 Watch: Hyundai i30 Front Brake Pads Replacement

Watch on YouTube ↗

Generation not stated in title; verify it is the 2017+ car.

Hyundai i30 Brake Pads reference plate
Before you buy: pad size and compound vary by engine and trim. Always confirm against your VIN before ordering.

How pads on the i30 slow the car

Brake pads clamp against the discs to convert the car's momentum into heat, slowing it down. On any version of the i30 with hybrid assistance or regenerative braking, this system handles a meaningful share of everyday slowing, which can extend pad life compared with a purely petrol or diesel equivalent.

How pad size varies by i30 version

i30N (2017 onwards), front pad, genuine referenceSized to match the 345mm disc/caliper on this tier. Pad size scales with engine output and trim on this model, not just the disc diameter — always confirm the exact pad against your VIN rather than assuming from generation alone.
i30N, rear padsSized to match the 314mm disc/caliper on this tier. Pad size scales with engine output and trim on this model, not just the disc diameter — always confirm the exact pad against your VIN rather than assuming from generation alone.
Standard trims (2013 onwards), front padsa different, larger pad to match the 280mm disc/caliper on this higher tier — not interchangeable with the standard-tier pad on the same axle.
Standard trims, rear padsa different, larger pad to match the 262mm disc/caliper on this higher tier — not interchangeable with the standard-tier pad on the same axle.
Find Hyundai i30 Brake Pads Here!

Opens live listings in a new tab.

Wear symptoms, DIY difficulty and aftermarket advice

These are the same regardless of make or model — see our full Brake Pads Guide for warning signs to watch for, confirming fitment against your VIN, and R90-certified aftermarket brands worth trusting.

The same part on other models

The same part, covered across other Hyundai models.