Jaguar XF Rear Bumper: Fitment, Sensors & Common Damage
On the XF, a factory cable tie at the boot hinge is fitted too tightly, and repeated flexing eventually breaks a wire inside — this fault got a recall in the US but not the UK.
Opens live listings in a new tab.
OEM Part Number: confirm via VIN
No aftermarket cover listed for this generation
| Rear bumper covers (aftermarket) | No complete aftermarket cover listed for this generation — order genuine against your VIN or use a used panel in your colour |
|---|---|
| Lower sections, corners & trims | None listed separately |
| Genuine (OE) numbers quoted | None quoted in the catalogue listings — the genuine cover varies by body style, parking sensors and tow bar, so order it against your VIN |
| Fitment notes | Match body style, facelift date and the holes for parking sensors or exhaust trims; covers come primed and need painting to your paint code before fitting. |
More than plastic: what a repair at the back of the XF involves
Kerb damage to the Jaguar XF's rear bumper is common, but the repair often isn't as simple as it looks: it houses parking sensors, a reversing camera, and sometimes exhaust trim finishers, all of which complicate what would otherwise be a straightforward panel replacement.
How the XF's back assembly protects the car
Beyond absorbing minor impacts, the rear bumper on higher trims of the XF often houses parking sensors, a reversing camera, and sometimes integrated exhaust finishers. A bumper that looks compatible can still be missing the correct cutouts or wiring provisions for your specific trim's equipment.
Watch: replacing itThe sequence is much the same on this generation: wheel-arch liner screws, the fixings along the boot aperture and under the lower edge, then unclip each corner from the wing and unplug any sensor loom before the cover comes away.
| All generations | Fuji White, Santorini Black, Firenze Red, Portofino Blue |
|---|
Opens live listings in a new tab.
An intermittent camera fault on the XF, explained
If the reversing camera has stopped working intermittently or shows just a blank screen, a well-documented, specific cause on related models is a factory-fitted cable tie at the boot hinge that's fitted too tightly, with the constant flexing every time the boot opens and closes gradually breaking one of the thin wires running through it. This exact fault has reportedly received a recall in the US, but Jaguar has not issued the same recall in the UK.
At least one case found that all the wiring needed to retrofit a genuine reversing camera was already present in the car from the factory, simply hidden from view — worth knowing this feature may sometimes already be built in, with a considerable charge simply for activating existing wiring.
Common damage, DIY difficulty and aftermarket adviceThese are the same regardless of make or model — see our full Rear Bumper Guide for common damage types, confirming fitment (body style and sensor equipment matter here), and OEM vs aftermarket guidance.
The same part on other modelsThe same part, covered across other Jaguar models.