Kia Sorento Engine Mount: Specs, Fitment & Common Faults

On the Sorento, a documented case saw all three mount bolts on one side genuinely shear off completely, leaving nothing holding the engine.

Illustration for editorial purposes

OEM Part Number: 21932-2B000

Genuinely important to know: a worn Sorento engine mount often shows up as a clunk on gear changes or noticeable vibration at idle rather than an obvious failure — worth diagnosing which specific mount is at fault (a pry-bar check with the engine running is a common technique) before buying a full replacement set unnecessarily.

MK2 (2009-2014), 2.2 CRDi, genuine engine mount bracket	Kia OEM: 21932-2B000
Transmission mount & rear torque strut	Genuinely separate part numbers to the mount shown above — sold individually, and worth inspecting together if chasing a vibration or clunk

A Genuinely Alarming, Real Failure Mode Worth Knowing About — Kia Sorento Engine Mount

This is genuinely worth knowing beyond simple rubber wear: one documented case on a related model saw all three bolts securing an engine mount shear off completely, leaving absolutely nothing physically holding that side of the engine in place. Worth having any mount with unusual movement or a persistent knock inspected properly rather than assuming it's simply cosmetic wear.

A genuinely useful, practical diagnostic technique worth trying: switching the engine off and paying attention to how it settles can be revealing — a pronounced swinging or rocking motion as the engine comes to rest points toward a mount that's lost its proper damping ability.

It's also genuinely worth knowing a money-relevant distinguishing test: with the car in neutral, giving the engine a few gentle revs — if the vibration reduces or disappears, this points toward a mount issue, whereas vibration that persists regardless of engine speed in neutral is more consistent with a failing dual mass flywheel, a considerably more expensive component.

Kia Sorento Engine Mount reference plate

What It Does

Engine mounts secure the engine and transmission to the chassis while absorbing vibration and movement, preventing that vibration from transferring directly into the cabin. Most versions of the Sorento use several mounts working together — typically at least one on each side of the engine plus a torque mount — and a single failed mount can throw off the whole assembly's balance.

Symptoms, DIY Difficulty & Aftermarket Advice

These are the same regardless of make or model — see our full Engine Mount Guide for warning signs to watch for (including some genuinely make-specific quirks in how they show up), confirming fitment against your VIN, and which aftermarket approach is worth trusting.

More Kia Engine Mount

The same part, covered across other Kia models.

Kia Sorento Engine Mount: Specs, Fitment & Common Faults

OEM Part Number: 21932-2B000

A Genuinely Alarming, Real Failure Mode Worth Knowing About — Kia Sorento Engine Mount

Shop for This Part on eBay