Car Parts Guide
TAIL LIGHTS Land Rover Discovery Sport · PARTS GUIDE

Land Rover Discovery Sport Tail Lights: Specs, Fitment & Common Faults

Drilling a tiny drain hole at a 45-degree angle into the solid black base of the housing has permanently resolved recurring condensation for multiple owners — plus an account of a dealer insisting on a pointless 30-minute test.

Land Rover Discovery Sport (2014 ON) tail light, LED unit, aftermarket Van Wezel 0259923 Illustration for editorial purposes
Find Land Rover Discovery Sport Tail Lights Here!

Opens live listings in a new tab.

OEM Part Number: confirm via VIN

Aftermarket rear lamps: Hella 2SD354831-031 / Van Wezel 0259923

Accuracy note: Covers the Land Rover Discovery Sport (2014-) as listed in the UK aftermarket catalogues. Tail lights are handed (left and right are different parts) and the right one depends on whether your car has bulb or LED units, whether the cluster comes with its bulb holder, the body style and the facelift date. The references below are UK aftermarket catalogue listings for this generation, labelled by brand with the fitment details the catalogue gives, and shown for the left-hand light with its right-hand pair where the catalogue names one. Carmakers rarely publish the genuine number against these, so order a genuine light against your VIN if you want a guaranteed match; if the unit on your car has a separate inner light on the tailgate, that is sold as its own part.
Tail lights (aftermarket)Van Wezel 0259923 (left, LED, with bulb holder, to 2019, inner section, right-hand pair 0259924); Hella 2SD354831-031 (left, LED, with bulb holder)
Genuine (OE) numbers quotedNone quoted in the catalogue listings — the genuine light varies by trim, bulb or LED type and facelift date, so order it against your VIN
Fitment notesLeft and right are separate parts; check LED or bulb type, whether the bulb holder is included, body style and facelift date before ordering.

The wiring and seals behind the rear lamps of the Discovery Sport

The Land Rover Discovery Sport's tail lights pack brake, indicator, reversing and rear fog functions into a single unit, so a fault in the wiring or housing can affect several of them simultaneously — meaning "the tail light's broken" could describe quite different underlying problems.

Before you buy: tail light design and bulb type vary by trim and facelift status. Always confirm against your VIN before ordering.

What the rear lamps on the Discovery Sport tell other drivers

Beyond basic rear visibility, tail light units on the Discovery Sport typically integrate brake lights, indicators, reversing lights and rear fog lights into a single housing. Higher trims may use LED units with a distinct light signature, which are not interchangeable with standard halogen units even if the physical mounting looks similar.

Watch: replacing it

🎬 Watch: How to remove Rear Tail Lamps Back Lights on Land Rover Discovery Sport L550

Watch on YouTube ↗
Land Rover Discovery Sport Tail Lights reference plate
Fitment and compatibility Generations and Lamp Type
Standard trimsHalogen bulb-based units as standard
Higher trims, later model yearsLED tail lights become available further up the range, a different assembly and connector from the halogen units on lower trims

Tail light design changed between generations of the Discovery Sport, and facelifted versions within the same generation often use a revised light signature that isn't interchangeable with pre-facelift units. Always confirm the exact part for your specific model year before ordering. Whether you're sourcing a replacement tail lights for your Land Rover Discovery Sport from a dealer, specialist, or online marketplace, always check compatibility against your registration or VIN before buying, and confirm you're ordering the correct side — driver's side (RH in the UK) or passenger side (LH in the UK) — since these are not interchangeable.

Find Land Rover Discovery Sport Tail Lights Here!

Opens live listings in a new tab.

A home fix for condensation that keeps coming back

If condensation in the rear tail light keeps returning no matter what's tried, multiple documented cases have permanently resolved this exact issue by drilling a small drain hole, as little as 3mm across, at a 45-degree angle into the solid black base of the light housing, normally hidden by the tailgate when closed, exiting through the base inside the enclosure. This has stopped recurring condensation for good in documented cases, with the hole itself being barely noticeable afterward — worth trying this fix if the condensation keeps returning despite drying the unit out repeatedly.

One case saw a dealer insist on running the car for thirty minutes to check whether condensation would clear, despite being told directly it hadn't cleared in over a month of continuous use. Predictably it didn't clear during the short test either, and the dealer then ordered a replacement anyway — worth persisting through this kind of seemingly pointless test if a dealer insists on it, since it can still lead to the replacement you're after.

Note too that even if condensation eventually clears on its own, permanent staining left on the inside of the lens afterward is still typically claimable under warranty, worth documenting this with photos if pursuing a claim.

Common faults, DIY difficulty and aftermarket advice

These are the same regardless of make or model — see our full Tail Lights Guide for diagnosing which circuit has failed, how easy this job is to DIY, and aftermarket advice.

The same part on other models

The same part, covered across other Land Rover models.