Car Parts Guide
TAIL LIGHTS Land Rover Freelander 2 · PARTS GUIDE

Land Rover Freelander 2 Tail Lights: Specs, Fitment & Common Faults

On the Freelander 2, breathable membranes in the lights on related models can cause condensation from a sudden temperature drop, considered normal.

Land Rover Freelander 2 (2006-2014) tail light, LED unit, aftermarket Van Wezel 0250921 Illustration for editorial purposes
Find Land Rover Freelander 2 Tail Lights Here!

Opens live listings in a new tab.

OEM Part Number: confirm via VIN

Aftermarket rear lamps: Van Wezel 0250921 / Hella 2VA354666-111

Accuracy note: Covers the Land Rover Freelander 2 (2006-2014) as listed in the UK aftermarket catalogues. Tail lights are handed (left and right are different parts) and the right one depends on whether your car has bulb or LED units, whether the cluster comes with its bulb holder, the body style and the facelift date. The references below are UK aftermarket catalogue listings for this generation, labelled by brand with the fitment details the catalogue gives, and shown for the left-hand light with its right-hand pair where the catalogue names one. Carmakers rarely publish the genuine number against these, so order a genuine light against your VIN if you want a guaranteed match; if the unit on your car has a separate inner light on the tailgate, that is sold as its own part.
Tail lights (aftermarket)Van Wezel 0250921 (left, with bulb holder, to 2011, right-hand pair 0250922); Hella 2VA354666-111 (left, with bulb holder); Hella 2VP354814-011 (left, LED, with bulb holder)
Genuine (OE) numbers quotedNone quoted in the catalogue listings — the genuine light varies by trim, bulb or LED type and facelift date, so order it against your VIN
Fitment notesLeft and right are separate parts; check LED or bulb type, whether the bulb holder is included, body style and facelift date before ordering.

More than a lens: the Freelander 2's rear lamp assembly

Because brake light, indicator, reversing light and rear fog light are usually combined in one Land Rover Freelander 2 tail light housing, a single electrical fault can knock out more than one function at once — which is why this particular complaint rarely means just one thing.

Before you buy: tail light design and bulb type vary by trim and facelift status. Always confirm against your VIN before ordering.

The jobs a rear lamp cluster does on the Freelander 2

Beyond basic rear visibility, tail light units on the Freelander 2 typically integrate brake lights, indicators, reversing lights and rear fog lights into a single housing. Higher trims may use LED units with a distinct light signature, which are not interchangeable with standard halogen units even if the physical mounting looks similar.

Watch: replacing it

🎬 Watch: Quick version ~ Land Rover Freelander 2 ~ How To Change FL2 Rear Light Cluster / bulb

Watch on YouTube ↗
Land Rover Freelander 2 Tail Lights reference plate
Fitment and compatibility Generations and Lamp Type
Standard trimsHalogen bulb-based units as standard
Higher trims, later model yearsLED tail lights become available further up the range, a different assembly and connector from the halogen units on lower trims

Tail light design changed between generations of the Freelander 2, and facelifted versions within the same generation often use a revised light signature that isn't interchangeable with pre-facelift units. Always confirm the exact part for your specific model year before ordering. Whether you're sourcing a replacement tail lights for your Land Rover Freelander 2 from a dealer, specialist, or online marketplace, always check compatibility against your registration or VIN before buying, and confirm you're ordering the correct side — driver's side (RH in the UK) or passenger side (LH in the UK) — since these are not interchangeable.

Find Land Rover Freelander 2 Tail Lights Here!

Opens live listings in a new tab.

Official guidance on condensation

If condensation has appeared inside a tail light, related Land Rover models are fitted with breathable membranes in the light housings, allowing internal air to match outside humidity, with a sudden temperature drop able to trigger visible condensation considered a normal characteristic rather than a fault.

Drilling a small drain hole at a 45-degree angle into the solid black base of the housing has permanently resolved recurring condensation on related models, worth trying if condensation keeps returning.

Even if condensation eventually clears, permanent staining left on the inside of the lens afterward is still typically claimable under warranty.

Common faults, DIY difficulty and aftermarket advice

These are the same regardless of make or model — see our full Tail Lights Guide for diagnosing which circuit has failed, how easy this job is to DIY, and aftermarket advice.

The same part on other models

The same part, covered across other Land Rover models.