Land Rover Freelander 2 Rear Shock Absorber: Specs, Fitment & Common Faults
Confirmed by parts suppliers: Standard (Passive) and Adaptive Dynamics (electronic) rear shocks are not interchangeable, and accessing the rear shock's top mount involves more interior trim removal than you might expect.
Opens live listings in a new tab.
OEM Part Number: confirm via VIN
Aftermarket rear dampers: Monroe D0422R / Febi Bilstein 1002401
| Rear shock absorbers (aftermarket) | Monroe D0422R (right, gas, strut); Febi Bilstein 1002401 (right, gas, strut); Febi Bilstein 1002372 (left, gas, strut) |
|---|---|
| Genuine (OE) numbers quoted | None quoted in the catalogue listings — the genuine damper varies by engine, suspension type and body style, so order it against your VIN |
| Standard (Passive), right | a different part number from the left-side shock, and from the Adaptive Dynamics version below — confirm both side and suspension type before ordering |
| Standard (Passive), left | A different reference from the right-side shock above |
| Adaptive Dynamics (electronic/MagneRide) | A different, electronically controlled shock from the standard passive version — fitment guides explicitly warn these are not interchangeable |
Shock absorbers should always be replaced in pairs, and a full four-wheel alignment is recommended after replacement.
Why adaptive dynamics changes the shock on the Freelander 2
Important to establish before ordering: this model offers two distinct rear suspension systems — a Standard (Passive) shock and an Adaptive Dynamics (electronic/MagneRide) shock. Fitment guides explicitly warn these are electronically and physically different and cannot be interchanged. Left and right are also separate, non-mirror-image parts.
Why worn dampers at the back of the Freelander 2 go unnoticed
The Land Rover Freelander 2's front end tends to dominate suspension conversations since it steers the car, but rear shock wear happens at a comparable rate — just with subtler warning signs that often get blamed on road noise until they're too obvious to ignore.
How a telescopic damper controls the Freelander 2's springs
On the Land Rover Freelander 2, how quickly the rear suspension compresses and rebounds over bumps comes down to the shock absorber, a separate function from the coil spring. Wear here shows up as excessive bounce that doesn't settle quickly after a bump.
Opens live listings in a new tab.
These are the same regardless of make or model — see our full Rear Shock Absorber Guide for symptoms of a worn shock, confirming fitment against your VIN, and OEM vs aftermarket guidance.
The same part on other modelsThe same part, covered across other Land Rover models.