Car Parts Guide
REAR SPRINGS Lexus CT200h · PARTS GUIDE

Lexus CT200h Rear Springs: Specs, Fitment & Common Faults

Hybrid and non-hybrid versions carry different weight, and the rear spring rate reflects that.

Lexus CT200h (2011 ON) rear coil spring, free length 272 mm, aftermarket Kilen 55108 Illustration for editorial purposes
Find Lexus CT200h Rear Springs Here!

Opens live listings in a new tab.

OEM Part Number: confirm via VIN

Aftermarket coils: Kilen 55108 / Monroe SP4955

Accuracy note: Covers the Lexus CT200h (2011-) as listed in the UK aftermarket catalogues. Rear coil springs are sold as a pair for the axle and should be replaced as a pair, because a new spring beside a tired one leaves the car sitting unevenly. The right spring depends on the engine and gearbox, the suspension type (standard, sport or heavy-duty) and, on some cars, the body style. The references below are UK aftermarket catalogue listings for this generation, labelled by brand with the fitment details the catalogue gives; carmakers rarely publish the genuine number against these, so match a genuine spring against your VIN if you want a guaranteed fit. Rear springs are sold in left/right pairs matched to a specific rate marking — confirm the marking on your existing spring rather than assuming from trim or powertrain alone.
Rear coil springs (aftermarket)Kilen 55108; Monroe SP4955 (272 mm); KYB K-Flex RA5039; Lesjöfors 4249108
Genuine (OE) numbers quotedNone quoted in the catalogue listings — the genuine spring varies by engine, suspension type and body style, so order it against your VIN
Petrol/non-hybrid, standard ratea different spring from the hybrid version below — confirm powertrain and side before ordering
HybridA different spring rate from the non-hybrid version, reflecting the different weight distribution of the hybrid drivetrain
F Sport, where fittedA different, stiffer spring from standard trims

Fitting the Lexus CT200h's rear springs one at a time tends to backfire: pairing a fresh spring with a sagged original on the other side leaves the car sitting unevenly and biases handling to one side.

Why the CT200h's coils snap on cold mornings

On the Lexus CT200h, the typical failure pattern here is gradual sag over months, barely noticeable beyond a marginally lower stance, followed by a sudden break at the coil's end with an audible clunk. If one rear corner appears to be sitting lower than the other, that's worth investigating.

Before you buy: hybrid vs non-hybrid and left/right side both affect fitment. Always confirm against your VIN before ordering.
Watch: replacing them

🎬 Watch: Coilover or Spring Install DIY on CT200h

Watch on YouTube ↗
Lexus CT200h Rear Springs reference plate

Ride height, load and the CT200h's coil springs

The Lexus CT200h's rear coil spring carries the weight of the car's back end and takes the first hit from any bump, working alongside — not instead of — the shock absorber. Once it sags or breaks, expect a lower ride height, possible headlight aim issues, and in severe cases, an MOT failure.

Find Lexus CT200h Rear Springs Here!

Opens live listings in a new tab.

Signs of a broken coil on the CT200h, the DIY job and quality brands

These are the same regardless of make or model — see our full Rear Springs Guide for symptoms of a failing spring, confirming fitment against your VIN, and OEM vs aftermarket guidance.

The same part on other models

The same part, covered across other Lexus models.