Mitsubishi Mirage Brake Discs: Specs, Fitment & Wear Symptoms
On the Mirage, Mitsubishi has faced multiple confirmed recalls on related models addressing corrosion in brake-related components.
Opens live listings in a new tab.
OEM Part Number: 4615A105
Genuine front disc, confirm via VIN. Aftermarket front discs: Brembo 09.C927.11 / Bosch 0 986 479 F14
| Front brake discs (aftermarket) | Brembo 09.C927.11 (251 x 17 mm, vented, 4 holes, coated, minimum thickness 15.4 mm); Bosch 0 986 479 F14 (251 x 17 mm, vented, 4 holes, coated high-carbon, minimum thickness 15.4 mm); ATE 24.0117-0112.1 (251 x 17 mm, vented, 4 holes, coated, minimum thickness 15.4 mm); TRW DF6908 (251 x 17 mm, vented, 4 holes, painted, minimum thickness 15.4 mm); Ferodo DDF2467C (251 x 17 mm, vented, 4 holes, coated, minimum thickness 15.4 mm); Zimmermann 380.2117.20 (251 x 17 mm, vented, 4 holes, coated, minimum thickness 15.4 mm); Zimmermann 380.2117.52 (251 x 17 mm, vented, 4 holes, coated, drilled sport disc, minimum thickness 15.4 mm); febi 108391 (251 x 17 mm, vented, 4 holes, coated, minimum thickness 15.4 mm) |
|---|---|
| Disc sizes & variants | One front size covers the whole range, 251 x 17 mm vented on a 4-bolt hub, for both the 1.0 and 1.2 petrol engines. The 211 x 11 mm solid disc (A.B.S. 17075) is a smaller part from an earlier Space Star rather than this car, and the 262 x 9.5 mm solid Ridex disc is a rear-axle part; the 294 mm discs listed by Ridex and ATE belong to larger Mitsubishi models and are not Mirage fitments. |
| Genuine (OE) numbers quoted | 4615A105 (genuine front disc number for this model — confirm via VIN, as several disc sizes exist) |
| Fitment notes | All 1.0 and 1.2 Mirage models take the same 251 mm vented front disc with a minimum thickness of 15.4 mm, so there is no engine-based variation to check; the only upgrade option listed is the drilled Zimmermann sport disc. |
Where the stopping actually happens on the Mirage
On the Mitsubishi Mirage, wear on one of this pair accelerates wear on the other, so a pad change booked as routine maintenance often turns up discs that have quietly deteriorated alongside them.
Same generation as 2012-. This one is the G4 saloon.
Vented, solid and drilled: what the Mirage uses and why
Brake discs provide the surface the brake pads clamp against to slow the car, converting momentum into heat through friction. Larger, sportier trims of the Mirage typically use bigger discs than standard versions to handle the additional heat generated by more aggressive braking.
Opens live listings in a new tab.
Recalls in the Mirage's range and how to check them
Mitsubishi has faced multiple confirmed recalls on related models addressing corrosion in brake-related components, including parking brake shafts and caliper boots not being properly water-sealed, traced back to a UK dealer's original field report about rear brake disintegration. It's worth checking your specific VIN against Mitsubishi's official recall register directly, particularly on a used car where you can't be certain a previous owner had any relevant recall work completed.
A burning smell alongside noticeably hot wheels after releasing the parking brake can indicate a seized, corroded rear caliper rubbing against the disc — worth having this checked promptly.
Wear symptoms, DIY difficulty and aftermarket adviceThese are the same regardless of make or model — see our full Brake Discs Guide for warning signs to watch for, confirming fitment against your VIN, and choosing a reliable aftermarket disc.
The same part on other modelsThe same part, covered across other Mitsubishi models.