Mitsubishi Outlander Brake Discs: Specs, Fitment & Wear Symptoms
Confirmed: a UK dealer's 2014 field report about rear brake disintegration led to a recall of over 170,000 vehicles — and critically, even the recall's own anti-corrosion fix later failed, requiring a third separate recall.
Opens live listings in a new tab.
OEM Part Number: 4615A125
Genuine front disc, confirm via VIN. Aftermarket front discs: Brembo 09.A738.11 / Bosch 0 986 479 372
| Front brake discs (aftermarket) | Brembo 09.A738.11 (294 x 24 mm, vented, 5 holes, coated); Brembo 09.A738.1X (294 x 24 mm, vented, 5 holes, coated, drilled); Bosch 0 986 479 372 (294 x 24 mm, vented, 5 holes, oiled); Bosch 0 986 479 751 (294 x 26 mm, vented, 5 holes, oiled); TRW DF6174 (294 x 24 mm, vented, 5 holes, painted); ATE 24.0124-0215.1 (294 x 24 mm, vented, 5 holes, coated); ATE 24.0126-0170.1 (294 x 26 mm, vented, 5 holes, coated); Brembo 09.D765.11 (320 x 28 mm, vented, 5 holes, coated) |
|---|---|
| Disc sizes & variants | Three front variants are listed: 294 x 24 mm, 294 x 26 mm and 320 x 28 mm. The 294 mm size is the common fitment and comes in two thicknesses, so the 24 mm and 26 mm versions must not be mixed; the 320 x 28 mm disc is the larger-brake option. |
| Genuine (OE) numbers quoted | 4615A125 (genuine front disc number for this model — confirm via VIN, as several disc sizes exist) |
| Fitment notes | Check the thickness of the disc already fitted before ordering, because the 294 mm disc exists in both 24 mm and 26 mm forms for this generation. Rear discs are 302 x 10 mm solid. No high-carbon front discs are listed; only the Brembo 09.A738.1X is drilled. |
What the pads press against every time the Outlander stops
On the Mitsubishi Outlander, wear on one of this pair accelerates wear on the other, so a pad change booked as routine maintenance often turns up discs that have quietly deteriorated alongside them.
Alt UiqvUL6EgZ4 (2011-2025 Outlander front brakes).
The job of the spinning rotor at each corner of the Outlander
Brake discs provide the surface the brake pads clamp against to slow the car, converting momentum into heat through friction. Larger, sportier trims of the Outlander typically use bigger discs than standard versions to handle the additional heat generated by more aggressive braking.
Opens live listings in a new tab.
A recall that started with a UK dealer's report
This is useful to know about the origin and scale of a confirmed safety recall: Mitsubishi received a field report from a UK dealer in October 2014 describing an instance of rear brake disintegration, which the company's own investigation traced to corrosion causing the parking brake shaft to stick. This led to a recall covering more than 170,000 vehicles across the 2013-2016 Outlander and Outlander Sport range, addressing parking brake shafts and rear brake caliper boots that weren't properly water-sealed, allowing moisture to cause extensive corrosion. This wasn't a single, one-off fix — there have been three separate recalls addressing this same underlying concern, since the second attempted fix, an anti-corrosion coating applied to the affected parts, was later found not to have fully resolved the issue in service. It's worth checking your specific VIN against all three recall campaigns rather than assuming an earlier recall visit means the concern is definitively closed.
Note too that a burning smell alongside noticeably hot wheels after releasing the parking brake can indicate a seized, corroded rear caliper rubbing against the disc — worth having this checked promptly given the risk of further damage and reduced braking performance if left unaddressed.
Wear symptoms, DIY difficulty and aftermarket adviceThese are the same regardless of make or model — see our full Brake Discs Guide for warning signs to watch for, confirming fitment against your VIN, and choosing a reliable aftermarket disc.
The same part on other modelsThe same part, covered across other Mitsubishi models.