Car Parts Guide
ENGINE MOUNT Mitsubishi Mirage · PARTS GUIDE

Mitsubishi Mirage Engine Mount: Specs, Fitment & Common Faults

On the Mirage, a garage on a related model quoted £600 for a mount part that's actually available for under £24.

Mitsubishi Mirage (2012 ON) engine mount positions: rear, right Illustration for editorial purposes
Find Mitsubishi Mirage Engine Mount Here!

Opens live listings in a new tab.

OEM Part Number: confirm via VIN

Aftermarket mountings: Febi 1004961 / Swag 33114842

Accuracy note: Covers the Mitsubishi Mirage (2012-) as listed in the UK aftermarket catalogues. Engine mounts are sold by position (left, right, front, rear, upper, lower), and the right one depends on the engine, the gearbox (manual, automatic or dual-clutch) and the trim. The references below are examples from the UK aftermarket catalogue for the engines checked on this generation, so match your own engine code and gearbox before ordering; the carmaker's own numbers are not quoted in those listings, so check the genuine mount against your VIN if you want a guaranteed match.
Engine Mount — Right (aftermarket)Febi 1004961, Swag 33114842
Engine Mount — Rear (aftermarket)Febi 1006471, Swag 33115151
Genuine (OE) numberNot quoted in the catalogue listings — mounts differ by engine and gearbox, so order the genuine ones against your VIN
Fitment notesThe listing above shows examples for the engines checked; petrol, diesel, manual and automatic versions often use different mounts, and cars usually have more than one mount.

Torque, movement and the Mirage's mountings

Engine mounts secure the engine and transmission to the chassis while absorbing vibration and movement, preventing that vibration from transferring directly into the cabin. Most versions of the Mirage use several mounts working together — typically at least one on each side of the engine plus a torque mount — and a single failed mount can throw off the whole assembly's balance.

Watch: replacing it

🎬 Watch: 2022 Modded Mirage replacing All engine and transmission mounts (Full 2014-2025 install tutorial)

Watch on YouTube ↗
Mitsubishi Mirage Engine Mount reference plate
Find Mitsubishi Mirage Engine Mount Here!

Opens live listings in a new tab.

A huge price gap between quotes

Before agreeing to an expensive quote for a mount-related clunk, one case on a related Mitsubishi model saw a garage quote £600 for what they described as a "differential mounting" part — but the actual replacement bush needed was available from an aftermarket brand for under £24 including delivery, or as a genuine Mitsubishi part for somewhere between £50 and £100. It's worth getting a second quote if you're facing a similarly high price for what sounds like this specific job.

Take a photo of the original mount bush before removing it from its bracket, since the orientation of the bush matters for correct reinstallation.

A clunk when moving off typically points toward a worn engine or motor mount, but a separate vibration that only appears at higher speed can have an entirely unrelated cause, such as binding brake calipers — worth not assuming every noise or vibration issue shares the same root cause.

Warning signs and quality replacement mountings for the Mirage

These are the same regardless of make or model — see our full Engine Mount Guide for warning signs to watch for (including some make-specific quirks in how they show up), confirming fitment against your VIN, and which aftermarket approach is worth trusting.

The same part on other models

The same part, covered across other Mitsubishi models.