Mitsubishi Mirage Rear Bumper: Fitment, Sensors & Common Damage
On the Mirage, worth knowing as context: reversing sensors on related Mitsubishi models have failed to switch off with a trailer connected due to a mismatched towbar kit.
Opens live listings in a new tab.
OEM Part Number: confirm via VIN
Aftermarket covers: Prasco MB1041051 / Van Wezel 3266540
| Rear bumper covers (aftermarket) | Prasco MB1041051 (Rear, Colour: black, Smooth); Prasco MB1021051 (Rear, primed); Van Wezel 3266540 (Rear); Van Wezel 3264544 (Rear, primed); Diederichs 5830155 (Rear, Smooth, for facelift); Klokkerholm 3747950A1 (Rear, primed) |
|---|---|
| Lower sections, corners & trims | None listed separately |
| Genuine (OE) numbers quoted | None quoted in the catalogue listings — the genuine cover varies by body style, parking sensors and tow bar, so order it against your VIN |
| Fitment notes | Match body style, facelift date and the holes for parking sensors or exhaust trims; covers come primed and need painting to your paint code before fitting. |
The tech built into the back of the Mirage
It's rarely a plain plastic panel on the Mitsubishi Mirage: the rear bumper usually integrates parking sensors and a reversing camera housing, sometimes exhaust trim too, so a seemingly minor kerb scrape can end up needing more than a simple like-for-like swap.
What the cover at the back of the Mirage does beyond looks
Beyond absorbing minor impacts, the rear bumper on higher trims of the Mirage often houses parking sensors, a reversing camera, and sometimes integrated exhaust finishers. A bumper that looks compatible can still be missing the correct cutouts or wiring provisions for your specific trim's equipment.
Watch: replacing itThe sequence is much the same on this generation: wheel-arch liner screws, the fixings along the boot aperture and under the lower edge, then unclip each corner from the wing and unplug any sensor loom before the cover comes away.
| Standard trims | White Diamond, Mystic Black, Sapphire Blue, Sand Yellow (hatchback only) |
|---|---|
| Ralliart special edition | Genuine two-tone combination pairing Mystic Black Metallic or Jet Black Metallic bodywork with a White Diamond roof, exclusive to this trim |
Opens live listings in a new tab.
What Mitsubishi towbar kits involve
If you're considering a towbar for this car, documented cases on related Mitsubishi models describe reversing sensors that couldn't automatically switch off when a trailer was connected, eventually traced to the towbar wiring kit being the wrong variant for that car's specific rear sensor configuration. It's worth confirming with whoever fits your towbar that the kit used matches your car's actual equipment, not just its general model and year.
Note too that that Japanese import models may lack a pre-installed towbar harness connector, requiring wiring to be spliced in directly rather than simply plugged into an existing factory connector.
Common damage, DIY difficulty and aftermarket adviceThese are the same regardless of make or model — see our full Rear Bumper Guide for common damage types, confirming fitment (body style and sensor equipment matter here), and OEM vs aftermarket guidance.
The same part on other modelsThe same part, covered across other Mitsubishi models.