Car Parts Guide
TAIL LIGHTS Mitsubishi Mirage · PARTS GUIDE

Mitsubishi Mirage Tail Lights: Specs, Fitment & Common Faults

On the Mirage, tail light condensation should dissipate within about one hour of the lights being switched on, per official Mitsubishi campaigns on related models.

Mitsubishi Mirage (2012 ON) tail light, LED unit, aftermarket Van Wezel 3266931 Illustration for editorial purposes
Find Mitsubishi Mirage Tail Lights Here!

Opens live listings in a new tab.

OEM Part Number: confirm via VIN

Aftermarket rear lamps: Van Wezel 3266931 / TYC 11-12782-15-2

Accuracy note: Covers the Mitsubishi Mirage (2012-) as listed in the UK aftermarket catalogues. Tail lights are handed (left and right are different parts) and the right one depends on whether your car has bulb or LED units, whether the cluster comes with its bulb holder, the body style and the facelift date. The references below are UK aftermarket catalogue listings for this generation, labelled by brand with the fitment details the catalogue gives, and shown for the left-hand light with its right-hand pair where the catalogue names one. Carmakers rarely publish the genuine number against these, so order a genuine light against your VIN if you want a guaranteed match; if the unit on your car has a separate inner light on the tailgate, that is sold as its own part.
Tail lights (aftermarket)Van Wezel 3266931 (left, LED, without bulb holder, from 2020, right-hand pair 3266932); TYC 11-12782-15-2 (left, with bulb holder); TYC 11-14804-16-2 (left, LED, with bulb holder); Alkar 2201657 (left, without bulb holder, right-hand pair 2202657)
Genuine (OE) numbers quotedNone quoted in the catalogue listings — the genuine light varies by trim, bulb or LED type and facelift date, so order it against your VIN
Fitment notesLeft and right are separate parts; check LED or bulb type, whether the bulb holder is included, body style and facelift date before ordering.

Why the Mirage's rear lamps are part of a wider circuit

The Mitsubishi Mirage's tail light unit typically bundles several functions into one housing — brake light, indicator, reversing light and rear fog light — which means a single electrical fault can affect more than one function at once, and a "faulty tail light" can mean several different things.

Before you buy: tail light design and bulb type vary by trim and facelift status. Always confirm against your VIN before ordering.

Inside the Mirage's rear lamp cluster

Beyond basic rear visibility, tail light units on the Mirage typically integrate brake lights, indicators, reversing lights and rear fog lights into a single housing. Higher trims may use LED units with a distinct light signature, which are not interchangeable with standard halogen units even if the physical mounting looks similar.

Watch: replacing it

🎬 Watch: HOW TO REPLACE CAR TAIL LIGHT MITSUBISHI MIRAGE G4 2017

Watch on YouTube ↗
Mitsubishi Mirage Tail Lights reference plate
Fitment and compatibility Generations and Lamp Type
Standard trimsHalogen bulb-based units as standard
Higher trims, later model yearsLED tail lights become available further up the range, a different assembly and connector from the halogen units on lower trims

Tail light design changed between generations of the Mirage, and facelifted versions within the same generation often use a revised light signature that isn't interchangeable with pre-facelift units. Always confirm the exact part for your specific model year before ordering. Whether you're sourcing a replacement tail lights for your Mitsubishi Mirage from a dealer, specialist, or online marketplace, always check compatibility against your registration or VIN before buying, and confirm you're ordering the correct side — driver's side (RH in the UK) or passenger side (LH in the UK) — since these are not interchangeable.

Find Mitsubishi Mirage Tail Lights Here!

Opens live listings in a new tab.

A documented check for damp lamps on the Mirage

If you're seeing condensation in a tail light, Mitsubishi has run official service campaigns on related models addressing this exact issue, with a clear, objective test worth using yourself first — moisture inside the light should dissipate within about one hour after the lights have been switched on. If it doesn't clear within roughly that timeframe, this points toward moisture having penetrated the assembly due to a crack or a manufacturing fault.

If the moisture is found to be due to a crack in the housing, replacement typically isn't covered and becomes the owner's responsibility, but if it's due to a manufacturing fault with the unit itself, replacement can be covered under an applicable campaign — worth asking a dealer directly which category applies.

Documented cases describe moisture returning to a tail light even after a covered replacement, sometimes years later — worth knowing that even a covered replacement doesn't necessarily guarantee the issue won't recur.

Common faults, DIY difficulty and aftermarket advice

These are the same regardless of make or model — see our full Tail Lights Guide for diagnosing which circuit has failed, how easy this job is to DIY, and aftermarket advice.

The same part on other models

The same part, covered across other Mitsubishi models.