Car Parts Guide
RADIATOR Peugeot 108 · PARTS GUIDE

Peugeot 108 Radiator: Specs, Fitment & Common Faults

On the 108, which side a coolant leak comes from often tells you whether it's the water pump or thermostat housing — plus why "no puddle" doesn't mean no leak.

Peugeot 108 (2014 ON) radiator, core 374 x 352 mm, aftermarket Nissens 606697 Illustration for editorial purposes
Find Peugeot 108 Radiator Here!

Opens live listings in a new tab.

OEM Part Number: confirm via VIN

Aftermarket units: Nissens 606697 / Denso DRM50134

Accuracy note: Covers the Peugeot 108 (2014-) as listed in the UK aftermarket catalogues. Radiators are sold by engine, gearbox and air-conditioning fitment, and one model usually has two or three different cores — a thicker core for diesels and automatics, a thinner one for small petrols — with different hose positions, so a radiator for the wrong engine will not connect up. The references below are UK aftermarket listings whose fitment lists name this generation, labelled by brand with the core size in mm; genuine numbers are those quoted against the listing. Check your engine code and whether the car has air conditioning against your VIN, and replace the coolant and bleed the system after fitting.
Radiators (aftermarket)Nissens 606697 (374 x 352 x 27 mm, brazed aluminium with plastic tanks, 1.0 VTi); Denso DRM50134; Ava TO2764; Van Wezel 09012701; Magneti Marelli 350213203200; Diederichs DCM3948; AKS Dasis 210005N
Core sizes & variantsOne small 374 x 352 mm core covers the 1.0 three-cylinder in all three badges.
Genuine (OE) numbers quotedB000765280; 164000Q080
Fitment notes28 mm inlet and outlet; seals are not listed as included.
Accuracy note: Whether a 108 has air conditioning or a larger optional engine can change radiator sizing on some variants — fitment guides that only ask for model and year can still get this wrong, so cross-check the engine code where possible.

A quick way to locate a leak on the 108

If you've found a coolant leak and can see roughly which side of the engine bay it's coming from, this is useful to know on a right-hand-drive UK car: a leak from the driver's side generally points to the water pump, while a leak from the passenger side generally points to the thermostat housing — both are common, well-documented failure points, and knowing which side narrows down the likely cause considerably before a garage even looks at it.

These leaks don't always produce a visible puddle on the ground. Several owners report a coolant reservoir that empties gradually over days with no pool ever appearing underneath the car — the leak can be fine enough that it simply mists away once the engine reaches full temperature, evaporating before it ever reaches the ground. Don't take "no puddle underneath the car" as proof there's no leak; a steadily dropping coolant level with no visible pool anywhere is still worth investigating as a likely thermostat housing or water pump seal issue.

Both the water pump and thermostat housing have been revised by Peugeot over time — if you're having either replaced, confirming you're getting the current, updated part reference rather than an older superseded version is worth asking about directly.

Keeping the 108's engine at the right temperature

Few parts get less attention than this one, but on the Peugeot 108, a neglected cooling system is behind the vast majority of avoidable serious engine failures. Noticing the early warning signs costs nothing and can save a large repair bill down the line.

Watch: replacing it

🎬 Watch: CityBug Radiator Replacement,.. And 5 Snapped Bolts. C1/Aygo/107 Losing Coolant (sister (peugeot 107 / citroen c1 mk1))

Watch on YouTube ↗

Previous-gen triplet; 108-gen layout is very similar.

Peugeot 108 Radiator reference plate
Before you buy: radiator size and design vary significantly by engine size, transmission type, and whether your car has air conditioning. Always confirm against your VIN before ordering.

How the 108's fan and core work together

On the Peugeot 108, coolant runs through the radiator to shed engine heat into the airflow, keeping temperatures in check. On many automatics, a separate internal circuit inside the same unit also cools the transmission fluid — one more reason a mismatched part number causes more than just a cooling problem.

Find Peugeot 108 Radiator Here!

Opens live listings in a new tab.

Faults, DIY difficulty and aftermarket advice

These are the same regardless of make or model — see our full Radiator Guide for the three common failure modes, confirming fitment against your VIN, and OEM vs aftermarket guidance.

The same part on other models

The same part, covered across other Peugeot models.