Peugeot 2008 Radiator: Specs, Fitment & Common Faults

On the 2008, which side a coolant leak comes from often tells you whether it's the water pump or thermostat housing — plus why "no puddle" doesn't mean no leak.

Illustration for editorial purposes

Find Peugeot 2008 Radiator Here!

Opens live listings in a new tab.

Peugeot 2008 Radiator: OEM Part Number

Manual gearbox, all engines	Standard radiator with no transmission cooling circuit
Automatic (EAT6/EAT8), all engines	Genuinely uses a separate automatic transmission oil cooler, connected via pipes into the radiator's coolant circuit — confirmed shared across the wider PSA Group range (Peugeot and Citroen models sharing one common part number), not a tank built into the radiator itself

Accuracy note: genuinely worth knowing: automatic gearbox 2008s typically need a radiator with a built-in transmission oil cooler that manual versions don't have — ordering the manual-spec part for an automatic car will fit, but won't cool the gearbox oil properly.

A Genuine, Useful Diagnostic Shortcut for RHD Cars — Peugeot 2008 Radiator

If you've found a coolant leak and can see roughly which side of the engine bay it's coming from, this is genuinely useful to know on a right-hand-drive UK car: a leak from the driver's side generally points to the water pump, while a leak from the passenger side generally points to the thermostat housing — both are common, well-documented failure points, and knowing which side narrows down the likely cause considerably before a garage even looks at it.

A genuinely important point worth knowing: these leaks don't always produce a visible puddle on the ground. Several owners report a coolant reservoir that empties gradually over days with no pool ever appearing underneath the car — the leak can be fine enough that it simply mists away once the engine reaches full temperature, evaporating before it ever reaches the ground. Don't take "no puddle underneath the car" as proof there's no leak; a steadily dropping coolant level with genuinely no visible pool anywhere is still worth investigating as a likely thermostat housing or water pump seal issue.

It's also worth knowing that both the water pump and thermostat housing have been revised by Peugeot over time — if you're having either replaced, confirming you're getting the current, updated part reference rather than an older superseded version is worth asking about directly.

Peugeot 2008 Radiator: The Part That Keeps Everything Else From Cooking

Few parts get less attention than this one, but on the Peugeot 2008, a neglected cooling system is behind the vast majority of avoidable serious engine failures. Noticing the early warning signs costs nothing and can save a genuinely large repair bill down the line.

Before you buy: radiator size and design vary significantly by engine size, transmission type, and whether your car has air conditioning. Always confirm against your VIN before ordering.

Peugeot 2008 Radiator: What It Does

On the Peugeot 2008, coolant runs through the radiator to shed engine heat into the airflow, keeping temperatures in check. On many automatics, a separate internal circuit inside the same unit also cools the transmission fluid — one more reason a mismatched part number causes more than just a cooling problem.

Find Peugeot 2008 Radiator Here!

Opens live listings in a new tab.

Peugeot 2008 Radiator: Faults, DIY Difficulty & Aftermarket Advice

These are the same regardless of make or model — see our full Radiator Guide for the three common failure modes, confirming fitment against your VIN, and OEM vs aftermarket guidance.

More Peugeot Radiator

The same part, covered across other Peugeot models.