Peugeot 208 Front Bumper: Fitment, Sensors & Common Damage
On the 208, the whole parking sensor system can fail from either one damaged sensor or a damp-prone control module — plus a free click-test to diagnose which.
OEM Part Numbers
A Genuinely Important Fact: The Whole System Can Fail From One Sensor, or the Module Itself — Peugeot 208 Front Bumper
If your entire parking sensor system has stopped working at once — front and rear together, not just one specific sensor — this is genuinely worth knowing: on this platform, if just one individual sensor fails internally, the parking assistance ECU can disable the entire system rather than just losing detection at that one point. Separately, and worth checking directly, the parking assistance ECU module itself (located in the left-hand inner compartment of the boot area) is genuinely prone to failing from damp and water ingress affecting the module directly, rather than any individual sensor being at fault at all. If you're chasing a total system failure, it's worth checking both possibilities rather than assuming it must be one specific sensor.
More Than Just a Plastic Panel
Modern front bumpers routinely integrate parking sensors, adaptive cruise control radar, and fog light housings, which means replacing one after even minor impact damage often involves more than a straightforward swap.
What It Does
Beyond absorbing minor impacts, the front bumper on higher trims of the 208 often houses parking sensors, the radar sensor used for adaptive cruise control, and fog lights. A bumper that looks compatible can still be missing the correct cutouts or mounting provisions for your specific trim's equipment.
Generations, Derivatives & Colour
| Mk1 (2012–2019), standard trims | Bianca White, Aluminium Grey, Nera Black, Ruby Red |
|---|---|
| Mk1 GTi/GTi by Peugeot Sport | Ice Silver and Ice Grey were genuinely unique textured finishes reserved for the GTi range; the GTi by Peugeot Sport special edition offered an exclusive Textured Matt Black/Lacquered Red two-tone not available on any other 208; different front bumper with larger air intakes than standard trim |
| Mk2 (2019–present), standard trims | Bianca White (no-cost), Cumulus Grey, Nera Black, Vertigo Blue |
| Mk2 facelift (2023–present) | Introduced Agueda Yellow and Selenium Grey as new shades |
| Mk2 GT | Elixir Red is considered the signature GT shade; different front bumper with gloss black wheel arches and larger air intakes than standard trim |
Shop for This Part on eBay
PEUGEOT 208 FRONT BUMPER 2015 - 2019 OE QUALITY PRIMED INSURANCE APPROVED
GBP 66.99
2020 - 2024 PEUGEOT 208 PRE-FACELIFT FRONT BUMPER COMPLETE + BOTH DRL LED (#N6)
GBP 335.00
Peugeot 208 Front bumper 12-15 Red paint code EPY Prefacelift
GBP 150.00
Peugeot 208 Front Bumper Pre Facelift Oasis Blue KGW 3 & 5 Door 2012-2014 MT62
GBP 99.99
PEUGEOT 208 MK2 2019 ON FRONT BUMPER COMPLETE WITH GRILLS & TRIMS 9823203580
GBP 314.96
PEUGEOT 208 FRONT BUMPER COMPLETE KIT 2015 - 2020 PRIMED OE 1613478880 NEW
GBP 199.99
PEUGEOT 208 Front Bumper 2020-ON | OEM 9828080980 Used Genuine B11
GBP 169.00
Peugeot 208 Front Bumper With Template For Parking Sensors & Park Assist 2023-
GBP 163.20
As an eBay Partner, Car United may earn commission from qualifying purchases shown above. Listings and pricing are pulled live from eBay and may vary.
Common Damage, DIY Difficulty & Aftermarket Advice
These are the same regardless of make or model — see our full Front Bumper Guide for common damage types to check for, confirming fitment against your VIN, and the sensor-calibration risk with cheap aftermarket covers.
More Peugeot Front Bumper
The same part, covered across other Peugeot models.