Renault Megane Rear Shock Absorber: Specs, Fitment & Common Faults
Worth confirming first: drivetrain and left/right side both affect which rear shock fits.
Opens live listings in a new tab.
OEM Part Number: confirm via VIN
Aftermarket rear dampers: Monroe 376257SP / NTY A-RE-049
| Rear shock absorbers (aftermarket) | Monroe 376257SP (gas, telescopic); NTY A-RE-049 (gas, telescopic); KYB Excel-g 3448031 (gas, telescopic) |
|---|---|
| Genuine (OE) numbers quoted | None quoted in the catalogue listings — the genuine damper varies by engine, suspension type and body style, so order it against your VIN |
| Front-wheel drive, right | a different part number from the left-side shock, and from the AWD version below |
| Front-wheel drive, left | A different reference from the right-side shock above |
| AWD, right/left | different references from the front-wheel-drive shocks, reflecting the different rear axle layout |
On the Renault Megane, it's generally worth fitting shock absorbers in pairs rather than one at a time, even if just one side shows obvious signs of failure.
The side-specific dampers fitted to the Megane
On the Renault Megane, left and right rear shocks aren't mirror images of each other — they're separate part numbers — and AWD versions, where available, use a different rear shock again from front-wheel-drive models, due to the different rear axle layout the AWD driveline needs.
Why the Megane's rear end gets overlooked until it wallows
It's easy to focus entirely on the Renault Megane's front suspension, since it also does the steering, but the rear shocks age just the same — often with subtler symptoms that get dismissed as road noise right up until they can't be ignored.
This video is of an earlier generation of the same model; the job is similar but the mounts and fixings can differ slightly.
Why the Megane needs dampers as well as springs
On the Renault Megane, controlling the speed of rear suspension compression and rebound over bumps is the shock absorber's job, working separately from the coil spring. A worn one means the back end bounces longer than it should after a bump.
Opens live listings in a new tab.
These are the same regardless of make or model — see our full Rear Shock Absorber Guide for symptoms of a worn shock, confirming fitment against your VIN, and OEM vs aftermarket guidance.
The same part on other modelsThe same part, covered across other Renault models.