Skoda Yeti Brake Discs: Specs, Fitment & Wear Symptoms
On the Yeti, OEM discs have a documented reputation for corroding faster than quality aftermarket alternatives — plus a genuine dealer tip to help prevent it.
OEM Part Numbers
| Rear disc, genuine reference | Skoda OEM: 1K0615601M (also referenced as 1K0615601AD) — 286mm diameter, solid, 12mm thickness, 10mm minimum |
|---|---|
| Front discs, PR code 1ZA | 312mm diameter, vented, 25mm thickness, 22mm minimum |
| Front discs, PR code 1ZF/1ZM | 280mm diameter, vented, 22mm thickness, 19mm minimum |
| 1.2 TSi, front discs | 280mm diameter, vented — rear disc correspondingly smaller at 253mm |
Confirmed: A Genuine, Well-Documented VW Group Corrosion Pattern
Across Skoda and wider VW Group owner forums, one theme repeats with remarkable consistency: OEM brake discs have a documented reputation for corroding and pitting considerably faster than quality aftermarket alternatives, particularly on the rear axle. Multiple owners who've switched to reputable aftermarket brands (Pagid and Napa Proformer both specifically mentioned across VW Group forums) report the corrosion problem disappearing entirely after fitting, suggesting this is genuinely more about the OEM disc material and coating than an inevitable characteristic of the car itself.
It's worth knowing dealers frequently treat corrosion-related disc replacement as chargeable "wear and tear" excluded from warranty, even on cars just a couple of years old with genuinely low mileage — but this isn't always the final word, and escalating a formal complaint in writing to Skoda customer services has resulted in goodwill contributions for other VW Group owners facing the same pattern.
The Part That Pads Depend On
Discs and pads work as a pair, and neglecting one tends to accelerate wear on the other — which is exactly why worn discs so often get discovered during what was meant to be a routine pad change.
What They Do
Brake discs provide the surface the brake pads clamp against to slow the car, converting momentum into heat through friction. Larger, sportier trims of the Yeti typically use bigger discs than standard versions to handle the additional heat generated by more aggressive braking.
Fitment & Compatibility
Disc size and specification vary by trim and braking package on the Yeti. Always confirm the exact disc size and design fitted to your specific trim before ordering. Whether you're sourcing a replacement brake discs for your Skoda Yeti from a dealer, specialist, or online marketplace, always check compatibility against your registration or VIN before buying.
Common Wear Symptoms
- Vibration or pulsing through the brake pedal — often a sign of warped discs, usually from excessive heat build-up.
- Visible grooves or scoring on the disc surface — indicates the pads have worn down to metal and are cutting into the disc itself.
- Squealing that persists even with new pads — can point to a rough or glazed disc surface needing replacement.
- Longer stopping distances despite good pads — worn or warped discs reduce effective braking surface contact.
DIY Replacement Difficulty
This is a moderate DIY job for someone comfortable with basic tools and a jack, typically done alongside a pad replacement since the caliper needs removing either way. Rear discs on cars with an electronic parking brake may need a specific tool or diagnostic device to retract the caliper. Expect 45–90 minutes per side including pads.
OEM vs. Aftermarket
Reputable aftermarket brake discs are widely regarded as safe and effective, provided they carry proper certification and match the correct size and design for your trim. As with pads, this is a part worth not cutting corners on — budget unbranded discs are a common source of premature warping and noise complaints.
More Skoda Brake Discs Guides
The same part, covered across other Skoda models.