Car Parts Guide
ENGINE MOUNT Subaru Impreza · PARTS GUIDE

Subaru Impreza Engine Mount: Specs, Fitment & Common Faults

On the Impreza, a rubber washer on the transmission mount's crossmember should be touching the metal — if it isn't, the mount has worn out.

Subaru Impreza (2017 ON) engine mount positions: rear Illustration for editorial purposes
Find Subaru Impreza Engine Mount Here!

Opens live listings in a new tab.

OEM Part Number: confirm via VIN

Aftermarket mountings: Metzger 8054541 / Febest SBM-010

Accuracy note: Covers the Subaru Impreza (2017-) as listed in the UK aftermarket catalogues. Engine mounts are sold by position (left, right, front, rear, upper, lower), and the right one depends on the engine, the gearbox (manual, automatic or dual-clutch) and the trim. The references below are examples from the UK aftermarket catalogue for the engines checked on this generation, so match your own engine code and gearbox before ordering; the carmaker's own numbers are not quoted in those listings, so check the genuine mount against your VIN if you want a guaranteed match.
Engine Mount — Rear upper (aftermarket)Original Imperium 610310, Febest SBM-010
Engine Mount — Rear (aftermarket)Herth+Buss JAKOPARTS J1797001, Metzger 8054541
Genuine (OE) numberNot quoted in the catalogue listings — mounts differ by engine and gearbox, so order the genuine ones against your VIN
Fitment notesThe listing above shows examples for the engines checked; petrol, diesel, manual and automatic versions often use different mounts, and cars usually have more than one mount.

Why a worn mounting makes the Impreza clunk

Engine mounts secure the engine and transmission to the chassis while absorbing vibration and movement, preventing that vibration from transferring directly into the cabin. Most versions of the Impreza use several mounts working together — typically at least one on each side of the engine plus a torque mount — and a single failed mount can throw off the whole assembly's balance.

Watch: replacing it

🎬 Watch: DIY Subaru Engine and Transmission Mount Install

Watch on YouTube ↗

This video shows a closely related car on the same platform, so the mount positions and fixings can differ slightly on yours.

Subaru Impreza Engine Mount reference plate
Find Subaru Impreza Engine Mount Here!

Opens live listings in a new tab.

A visual check at the crossmember

If you suspect the transmission mount, this is worth checking yourself: looking at the crossmember where the mount attaches reveals three nuts in the middle, with the centre one having a rubber washer beneath it. If that washer isn't actually touching the crossmember anymore, this is a visual sign the mount has worn out and compressed.

Shifting into neutral while a clunk or vibration is present and seeing whether it disappears can help distinguish a genuine mount issue from a fault in the rotating parts of the drivetrain itself. If the noise disappears in neutral, this points toward the mounts; if it persists, the cause more likely lies in the transmission, differentials, or axles.

Bear in mind that reaching the engine mount securing nuts commonly requires removing the anti-roll bar first, worth considering replacing the anti-roll bar links at the same time if they're due, since you'll already have the access needed.

Diagnosing wear on the Impreza and picking replacements

These are the same regardless of make or model — see our full Engine Mount Guide for warning signs to watch for (including some make-specific quirks in how they show up), confirming fitment against your VIN, and which aftermarket approach is worth trusting.

The same part on other models

The same part, covered across other Subaru models.