Car Parts Guide
REAR SPRINGS Subaru Outback · PARTS GUIDE

Subaru Outback Rear Springs: Specs, Fitment & Common Faults

Worth knowing: the rear spring and shock are commonly sold together as a complete assembly on Subaru's platform, not always as separate parts.

Subaru Outback (2015-2020) rear coil spring, free length 308 mm, aftermarket Kilen 63361 Illustration for editorial purposes
Find Subaru Outback Rear Springs Here!

Opens live listings in a new tab.

OEM Part Number: confirm via VIN

Aftermarket coils: Kilen 63361 / KYB K-Flex RA5908

Accuracy note: Covers the Subaru Outback (BS 2015-2020) as listed in the UK aftermarket catalogues. Rear coil springs are sold as a pair for the axle and should be replaced as a pair, because a new spring beside a tired one leaves the car sitting unevenly. The right spring depends on the engine and gearbox, the suspension type (standard, sport or heavy-duty) and, on some cars, the body style. The references below are UK aftermarket catalogue listings for this generation, labelled by brand with the fitment details the catalogue gives; carmakers rarely publish the genuine number against these, so match a genuine spring against your VIN if you want a guaranteed fit. Subaru's own parts catalogue can list separate rear spring references for automatic and manual transmission versions of the same engine, in addition to the turbo/non-turbo split.
Rear coil springs (aftermarket)Kilen 63361; KYB K-Flex RA5908 (308 mm); Lesjöfors 4288361; Triscan 87506862
Genuine (OE) numbers quotedNone quoted in the catalogue listings — the genuine spring varies by engine, suspension type and body style, so order it against your VIN
Naturally aspirated, standard ratea different spring from the turbo version below — confirm engine and transmission before ordering
Turbo, where fittedA different, typically stiffer spring from the naturally aspirated version

Always replace Subaru Outback rear springs in pairs — a single new spring paired with an old, sagged one on the other side creates an uneven ride height and handling bias.

Why coils break more often in the UK, and the Outback

On the Subaru Outback, a rear spring often sags gradually for months without an obvious symptom beyond a slightly lower ride height, then fails suddenly at the coil's end with an audible clunk — worth bearing in mind if you notice one rear corner sitting lower than the other.

The rear spring and shock are commonly sold together as a complete strut assembly on this model rather than always as separate parts — check whether a listing is for the complete assembly or the spring alone before ordering.
Before you buy: turbo vs naturally aspirated, transmission type, and generation all affect fitment. Always confirm against your VIN before ordering.
Watch: replacing them

🎬 Watch: 2009 Subaru Outback rear spring and strut replacement

Watch on YouTube ↗

This video is of an earlier generation of the same model; the job is similar but fixings can differ slightly.

Subaru Outback Rear Springs reference plate

Why the Outback's coils matter for handling and braking

The Subaru Outback's rear coil spring supports the weight of the car's rear end and absorbs the initial impact of a bump, working alongside the shock absorber rather than replacing its function. A sagged or broken spring lowers ride height, can affect headlight aim, and in severe cases is an MOT failure item.

Find Subaru Outback Rear Springs Here!

Opens live listings in a new tab.

Warning signs and the right replacement set for the Outback

These are the same regardless of make or model — see our full Rear Springs Guide for symptoms of a failing spring, confirming fitment against your VIN, and OEM vs aftermarket guidance.

The same part on other models

The same part, covered across other Subaru models.