Suzuki Baleno Fuel Pump: Specs, Fitment & Common Faults
On the Baleno, Suzuki has issued multiple fuel pump recalls across its range — worth checking your specific VIN directly.
Opens live listings in a new tab.
OEM Part Number: confirm via VIN
Aftermarket units: Bosch 0 580 454 094 / Pierburg 7.21440.51.0
| Fuel pumps / feed units (aftermarket) | Bosch 0 580 454 094 (bare in-tank pump, petrol); Delphi FE0429-12B1 (bare in-tank pump, petrol, 113 x 38 mm, without pressure sensor); Delphi FE0545-12B1 (bare in-tank pump, 112.6 x 38 mm); Pierburg 7.21440.51.0 (low-pressure feed pump, 0.3-0.4 bar, 2-pin, 2 A, 133.5 mm); Meat & Doria 76416 (bare in-tank pump, 3 bar / 95 l/h, OE 170429F500); Meat & Doria 76385 (bare in-tank pump, 3.5 bar / 90 l/h, OE 3111137300); ERA 770162A (bare in-tank pump, 3.2 bar / 120 l/h, 2-pin, 38 mm body) |
|---|---|
| Types & variants | The 3-4 bar 38 mm cartridges are the petrol injection pumps; the Pierburg 7.21440.51.0, ERA 770034A (0.2 bar / 70 l/h) and Energy G10080 inline unit are low-pressure transfer pumps and not suitable as the main pump. Maxgear 43-0219 is the only unit sold with its holder. No diesel exists for this model. |
| Genuine (OE) numbers quoted | 170429F500 (Meat & Doria 76416, Hoffer 7506416); 3111137300 (Meat & Doria 76385, Hoffer 7506385); 8450008680 (Kamoka 8410005); 8941674933 (Meat & Doria 76041) |
| Fitment notes | The Baleno runs an in-tank pump module with integral sender; the cartridges above drop into the existing housing and keep the gauge sender. Match the 38 mm body and outlet size to the original pump before buying. |
Why a failing pump strands the Baleno at the worst moment
On the Suzuki Baleno, there's rarely a convenient time for this to fail — it tends to strike mid-journey rather than while the car's sitting safely on the drive. Knowing what the early symptoms look like buys valuable time to get ahead of it.
The job here is simple in principle — draw fuel from the tank, deliver it to the engine at the right pressure — but the Suzuki Baleno's fuel pump sits submerged inside the tank, which makes physical access for replacement far more involved than the small part itself implies.
Which unit each Baleno engine uses
| 2015–present, K-series/Boosterjet petrol | Petrol (direct injection): in-tank low-pressure pump plus a separate engine-mounted high-pressure pump |
|---|
Suzuki Fuel Pump Problems
Opens live listings in a new tab.
A quick recall check for Baleno owners
Suzuki has issued multiple confirmed fuel pump recalls across its range, including a fuel pump material defect on certain models that can cause the engine to stall, and a separate, large-scale recall covering nearly 467,000 SX4 and Vitara vehicles worldwide for a fuel vapour leak issue. It's worth checking your specific VIN against Suzuki's official recall register directly, particularly on a used car where you can't be certain a previous owner had any relevant recall work completed.
Any work carried out under a confirmed manufacturer recall should be completely free of charge regardless of the car's age or ownership history — worth knowing this if a dealer ever suggests otherwise.
Warning signs, DIY difficulty and aftermarket adviceThese are the same regardless of make or model — see our full Fuel Pump Guide for symptoms to watch for (including the low-pressure vs high-pressure distinction on direct-injection engines), confirming fitment against your VIN, and OE suppliers worth knowing.
The same part on other modelsThe same part, covered across other Suzuki models.