Car Parts Guide
ENGINE MOUNT Toyota Auris · PARTS GUIDE

Toyota Auris Engine Mount: Specs, Fitment & Common Faults

On the Auris, hybrid and non-hybrid models use different mount part numbers — worth verifying before ordering.

Toyota Auris (E180 2013-2018) engine mount positions: front, rear Illustration for editorial purposes
Find Toyota Auris Engine Mount Here!

Opens live listings in a new tab.

OEM Part Number: confirm via VIN

Aftermarket mountings: Herth+Buss JAKOPARTS J1792006 / Kavo EEM-9375

Accuracy note: Covers the Toyota Auris (E180 2013-2018) as listed in the UK aftermarket catalogues. Engine mounts are sold by position (left, right, front, rear, upper, lower), and the right one depends on the engine, the gearbox (manual, automatic or dual-clutch) and the trim. The references below are examples from the UK aftermarket catalogue for the engines checked on this generation, so match your own engine code and gearbox before ordering; the carmaker's own numbers are not quoted in those listings, so check the genuine mount against your VIN if you want a guaranteed match.
Engine Mount — Other mounts (position not stated) (aftermarket)Kavo EEM-9375 (manual)
Engine Mount — Rear (aftermarket)Original Imperium 610205, Herth+Buss JAKOPARTS J1792006
Engine Mount — Front (aftermarket)Original Imperium 610194, Kavo EEM-9393
Genuine (OE) numberNot quoted in the catalogue listings — mounts differ by engine and gearbox, so order the genuine ones against your VIN
Fitment notesThe listing above shows examples for the engines checked; petrol, diesel, manual and automatic versions often use different mounts, and cars usually have more than one mount.

Check hybrid or petrol before ordering for the Auris

If your car has both hybrid and non-hybrid variants, hybrid and non-hybrid models commonly use different engine mount part numbers, despite looking broadly similar. Always verify your exact engine type before ordering a replacement mount, since fitting the wrong variant is a documented mistake worth avoiding.

A worn mount can make the engine's frequent automatic starting and stopping (a normal characteristic of how the hybrid system operates) feel considerably harsher and more noticeable than it should — if this transition has started feeling like a jolt rather than a smooth changeover, a worn mount is worth investigating.

Bear in mind that excessive vibration at idle, particularly noticeable when stopped in Drive or Reverse and lessening in Park or Neutral, is the most common documented symptom of a failing mount — worth checking this specific pattern before assuming a more complex engine fault.

Watch: replacing it

🎬 Watch: 2003 - 2008 Toyota Corolla - Rear Transmission / Engine Mount Diagnosis and Replacement

Watch on YouTube ↗

This video shows a closely related car on the same platform, so the mount positions and fixings can differ slightly on yours.

Toyota Auris Engine Mount reference plate

The job the mountings do

Engine mounts secure the engine and transmission to the chassis while absorbing vibration and movement, preventing that vibration from transferring directly into the cabin. Most versions of the Auris use several mounts working together — typically at least one on each side of the engine plus a torque mount — and a single failed mount can throw off the whole assembly's balance.

Find Toyota Auris Engine Mount Here!

Opens live listings in a new tab.

Clunks, vibration and whether to fit Auris mountings yourself

These are the same regardless of make or model — see our full Engine Mount Guide for warning signs to watch for (including some make-specific quirks in how they show up), confirming fitment against your VIN, and which aftermarket approach is worth trusting.

The same part on other models

The same part, covered across other Toyota models.