Toyota Prius Front Suspension Strut: Specs, Fitment & Common Faults
On the Prius, a documented case resolved a suspension "thump" completely just by lubricating dry control arm bushes.
Opens live listings in a new tab.
OEM Part Number: confirm via VIN — front struts (aftermarket) Bilstein 22-354891
| Front strut / shock absorber (aftermarket) | KYB Excel-G 3350026 (RH) and 3350027 (LH); Bilstein 22-354891 (RH) and 22-354884 (LH); Denckermann DSB603G (RH) and DSB604G (LH); Maxgear 11-1499 (LH) and 11-1500 (RH); Kamoka 2001104 (LH). |
|---|---|
| Front lower arm / wishbone (aftermarket) | Yamato J32118YMT (RH) and J32119YMT (LH); Sidem 45256 (LH) and 45257 (RH), ball joint separate, cone 15.3 mm; Delphi TC8298 (LH, lower, without ball joint, 425 mm) with TC8301; Quinton Hazell QSA2958S/QSA2959S (ball joint); A.B.S. 212241/212242 (ball joint). |
| Top mount / strut bearing (aftermarket) | Metzger 6490488 (upper, LH and RH); GH GH-364576 (repair kit, no bearing); febi 183629 (plastic, 75 mm); KYB SM5665 (mounting kit); Maxgear 72-4234; Metalcaucho 57210 (with rolling bearing). |
| Genuine (OE) numbers quoted | Top mount 4861928010 (Original Imperium 72506); none quoted for struts or arms. |
| Fitment notes | Standard twin-tube gas struts |
A Genuinely Money-Saving Fix Worth Trying First — Toyota Prius Front Suspension
If you're hearing a muted "thump" or "pop" from the front suspension, particularly on rebound over speed humps, this is genuinely worth trying: one documented case saw exactly this noise resolved completely simply by lubricating the lower control arm bushes, which had dried out, rather than replacing any actual component — using a silicone-specific spray on the bushes.
It's also worth knowing that a clunk specifically over wide speed humps, but with no unusual noise on smaller bumps, has been documented on brand-new cars and can sometimes trace back to a subframe bolt not properly torqued at the factory.
Toyota Prius Front Suspension Strut: The System That Quietly Does All the Work
On the Toyota Prius, every pothole, bump and cornering load gets filtered through these parts long before it's felt inside the car, which is precisely why wear rarely shows up as one clean symptom. A methodical, process-of-elimination check tends to find the actual culprit much faster than guessing.
Toyota Prius Front Suspension Strut: Watch: Replacing It
3rd gen (XW30); no 2016+ XW50 strut video found
Toyota Prius Front Suspension Strut: What It Does
The Toyota Prius's front struts fold two components into one: the damper and the coil spring's mount. A worn strut means the car keeps moving after a bump rather than settling promptly, and that lingering movement can accelerate uneven tyre wear over time.
Opens live listings in a new tab.
Toyota Prius Front Suspension Strut: Warning Signs, DIY Difficulty & Aftermarket Advice
These are the same regardless of make or model — see our full Front Suspension Strut Guide for symptoms of worn bushings and ball joints, confirming fitment against your VIN, and rubber vs polyurethane guidance.
More Toyota Front Suspension Strut
The same part, covered across other Toyota models.
- Toyota Auris Front Suspension Strut
- Toyota Avensis Front Suspension Strut
- Toyota Aygo Front Suspension Strut
- Toyota C-HR Front Suspension Strut
- Toyota Corolla Front Suspension Strut
- Toyota GT86 Front Suspension Strut
- Toyota RAV4 Front Suspension Strut
- Toyota Verso Front Suspension Strut
- Toyota Yaris Front Suspension Strut