Car Parts Guide
FRONT SUSPENSION STRUT Toyota Verso · PARTS GUIDE

Toyota Verso Front Suspension Strut: Specs, Fitment & Common Faults

On the Verso, a case resolved a suspension "thump" completely just by lubricating dry control arm bushes.

Toyota Verso (2009-2018) front suspension, strut Trw Jgm1011T, top mount Febi 171865, OEM 485108Z056 Illustration for editorial purposes
Find Toyota Verso Front Suspension Strut Here!

Opens live listings in a new tab.

OEM Part Number: 485108Z056

Front strut, as quoted in catalogue listings, confirm via VIN. Aftermarket struts KYB 335824

Accuracy note: Covers the Toyota Verso (2009-2018) as listed in the UK aftermarket catalogues. Front struts, lower arms and top mounts are sold by side and by suspension spec — standard, sport / lowered (S line, M Sport, R-Line, ST-Line etc.), heavy-duty and adaptive / electronic damping all use different part numbers, and some makers split by engine or front axle load. The references below are UK aftermarket catalogue listings for this generation, labelled by brand; genuine numbers are shown only where a listing quotes one. Confirm the fit against your VIN, and replace struts and top mounts in pairs.
Front strut / shock absorber (aftermarket)TRW JGM1011T (twin-tube gas, 51 mm, 22 mm rod, 475/330 mm, one per axle); TRW JGM1011SL (left) and JGM1011SR (right) (twin-tube gas); KYB 335824 (left) and 335823 (right) (gas, rebound spring); KYB 335822 (left) and 3358005 (right) (gas, rebound spring); DACO 453902L (left) and 453902R (right); Japanparts MM-22120 (left) and MM-22119 (right)
Front lower arm / wishbone (aftermarket)LH Lemförder 38541 01 is listed for the right only; LH Ridex 273C1406 (sheet steel, 302 mm), Kamoka 9050181; RH Ridex 273C1531 (304 mm), febi 43071 (paired with 43070), Lemförder 38541 01 (279 mm, M14x1.5), NTY ZWD-TY-158; Delphi TC2283 (right, ball joint, front axle not stated, pair TC2282)
Top mount / strut bearing (aftermarket)febi 171865 (no bearing, elastomer); febi 183736 (with ball bearing); Kavo SSM-10364 (with ball bearing); KYB SM1011 (mounting kit); Blue Print ADBP800069 (no bearing); Original Imperium 72506
Genuine (OE) numbers quotedJapanparts MM-22119 (right strut) 485108Z056; Japanparts MM-22120 (left strut) 4852009U21; Original Imperium 72506 (top mount) 4861928010; Sasic 2656138 (top mount) 486090F021
Fitment notesStandard gas twin-tube struts only, no sport or adaptive units listed and no engine split

The pop over speed humps on the Verso, fixed cheaply

If you're hearing a muted "thump" or "pop" from the front suspension, particularly on rebound over speed humps, one case saw exactly this noise resolved completely simply by lubricating the lower control arm bushes, which had dried out, rather than replacing any actual component — using a silicone-specific spray on the bushes.

One case saw drop links and anti-roll bar bushes replaced with zero improvement to a persistent clunk, only for the actual cause to turn out to be recently fitted brake pads rattling very slightly within the caliper — not a suspension fault at all.

A clunk over wide speed humps, but with no unusual noise on smaller bumps, has been documented on brand-new cars and can sometimes trace back to a subframe bolt not properly torqued at the factory.

Why wear in the Verso's suspension creeps up quietly

On the Toyota Verso, every bump, pothole and corner passes through these components before you ever feel it in the cabin, which is exactly why wear here shows up as vague, hard-to-pin-down symptoms rather than one obvious failure. A methodical check usually finds the culprit faster than guesswork.

Watch: replacing it

🎬 Watch: Toyota Verso Shock and Spring Replacement

Watch on YouTube ↗

Front shock and spring (per title)

Toyota Verso Front Suspension reference plate
Before you buy: suspension components vary by trim, engine weight and whether your car has the standard or sport-tuned setup. Always confirm against your VIN before ordering.

How the Verso keeps its front wheels on the road

The Toyota Verso's front suspension strut combines a shock absorber with the coil spring mounting point in one assembly, controlling how quickly the suspension compresses and rebounds over bumps. A worn strut lets the car bounce excessively after a bump instead of settling quickly, and can accelerate uneven tyre wear if left unaddressed.

Find Toyota Verso Front Suspension Strut Here!

Opens live listings in a new tab.

Warning signs, DIY difficulty and aftermarket advice

These are the same regardless of make or model — see our full Front Suspension Strut Guide for symptoms of worn bushings and ball joints, confirming fitment against your VIN, and rubber vs polyurethane guidance.

The same part on other models

The same part, covered across other Toyota models.