Volkswagen Caddy Front Bumper: Fitment, Sensors & Common Damage

On the Caddy, a genuine case of a dealer quoting hundreds for a single parking sensor claiming bumper removal was necessary — when it's actually a genuine 3-minute swap.

Illustration for editorial purposes

Find Volkswagen Caddy Front Bumper Here!

Opens live listings in a new tab.

OEM Part Number: confirm via VIN — front bumper (aftermarket) Prasco VG9071020 / Van Wezel 5854570

Accuracy note: Covers the Volkswagen Caddy (2K 2010-2020) as listed in the UK aftermarket catalogues. A front bumper is a body-coloured plastic skin, so what you buy is a primed cover that still needs painting to your paint code, and the right one depends on body style, trim, facelift date and the holes moulded into it for parking sensors, fog lights, headlamp washers or a tow eye cover. A cover without the right holes cannot be drilled accurately at home. The references below are UK aftermarket catalogue listings for this generation, labelled by brand with the fitment details the catalogue gives; carmakers rarely publish the genuine number against these, so order a genuine cover against your VIN if you want a guaranteed match. The splitters, outer sections and trims listed separately are the parts most often sold on their own after a car-park knock.

Front bumper covers (aftermarket)	Prasco VG9071020 (primed); Prasco VG9071001; Van Wezel 5854570 (with fog light holes, with headlamp washer holes, with tow eye cover hole); Van Wezel 5854574 (primed, with fog light holes, with parking sensor holes, with headlamp washer holes, with tow eye cover hole); Van Wezel 5854575 (primed, with fog light holes, with parking sensor holes, with headlamp washer holes, with tow eye cover hole)
Splitters, outer sections & trims	None listed separately
Genuine (OE) numbers quoted	None quoted in the catalogue listings — the genuine cover varies by body style, trim, parking sensors and fog lights, so order it against your VIN
Fitment notes	Match body style, trim, facelift date and the holes for parking sensors, fog lights and washer jets; covers come primed and need painting to your paint code before fitting.

A Genuine, Money-Saving Find on Single Sensor Replacement — Volkswagen Caddy Front Bumper

A genuinely significant, money-saving finding worth knowing if a single front parking sensor has failed: one documented case saw a VW dealer quote £546 for a single sensor replacement, insisting the bumper needed to come off, the radar recalibrated, and the parking sensors recalibrated as separate, chargeable steps — but the actual repair, once researched properly, turned out to be a genuine 3-minute job requiring no bumper removal at all, since the sensors simply push-fit into their housings from behind and unclip individually. A replacement sensor sourced independently cost a small fraction of the dealer quote in this documented case.

Worth knowing before assuming the worst: a genuine "stone chip" type sensor is generally a simple like-for-like swap, though several owners report a diagnostic tool is still needed afterward to clear the stored fault code, even if a full recalibration procedure isn't strictly required. Get a second opinion or a specific breakdown of exactly what work is genuinely necessary before accepting a quote that assumes bumper removal for what is very often a straightforward individual sensor replacement.

Separately, it's worth knowing that persistent false parking sensor alerts (triggering with nothing genuinely nearby) have been reported widely enough on some newer models that VW has acknowledged investigating it as a genuine, unresolved issue — with some workshop sources describing exposed LIN-BUS wiring as a suspected contributing factor still under analysis at the time of reporting. If you're experiencing this and a dealer can't find a fault on their diagnostic scan, it's worth knowing you're likely not alone, and that repeated attempted fixes without addressing an underlying design issue may not resolve it.

Volkswagen Caddy Front Bumper: More Than Just a Plastic Panel

The Volkswagen Caddy's front bumper doubles as a sensor housing — parking sensors, adaptive cruise radar, and fog lights are all commonly built in — which is why even minor impact damage can turn a straightforward-looking swap into a bigger job.

Volkswagen Caddy Front Bumper: Watch: Replacing It

🎬 Watch: VW Caddy 2015 remove headlight assembly and bumper

Watch on YouTube ↗

Volkswagen Caddy Front Bumper reference plate

Before you buy: bumper specification varies significantly by trim, particularly around parking sensor cutouts, radar mounting points and fog light provisions. Always confirm against your VIN before ordering.

Volkswagen Caddy Front Bumper: What It Does

Beyond absorbing minor impacts, the front bumper on higher trims of the Caddy often houses parking sensors, the radar sensor used for adaptive cruise control, and fog lights. A bumper that looks compatible can still be missing the correct cutouts or mounting provisions for your specific trim's equipment.

Volkswagen Caddy Front Bumper: Generations & Colour

All generations	Candy White (code B9A, shared across the VW/Audi range), Pure White, Deep Black Pearl, Reflex Silver
Paint code note	VWs are notoriously difficult to find a paint code sticker on compared to other brands — check the driver's door jamb, the spare wheel well, or the service booklet if it isn't immediately visible

Find Volkswagen Caddy Front Bumper Here!

Opens live listings in a new tab.

Volkswagen Caddy Front Bumper: Common Damage, DIY Difficulty & Aftermarket Advice

These are the same regardless of make or model — see our full Front Bumper Guide for common damage types to check for, confirming fitment against your VIN, and the sensor-calibration risk with cheap aftermarket covers.

More Volkswagen Front Bumper

The same part, covered across other Volkswagen models.