Car Parts Guide
ENGINE MOUNT Audi Q5 · PARTS GUIDE

Audi Q5 Engine Mount: Specs, Fitment & Common Faults

On the Q5, engine mount bolts have been documented shearing off entirely on related models after engine work that required removing the mount.

Audi Q5 (2008-2017) engine mount positions: left, right Illustration for editorial purposes
Find Audi Q5 Engine Mount Here!

Opens live listings in a new tab.

OEM Part Number: confirm via VIN

Aftermarket mountings: Febi 43704 / Lemförder 3474501

Accuracy note: Covers the Audi Q5 (8R 2008-2017) as listed in the UK aftermarket catalogues. Engine mounts are sold by position (left, right, front, rear, upper, lower), and the right one depends on the engine, the gearbox (manual, automatic or dual-clutch) and the trim. The references below are examples from the UK aftermarket catalogue for the engines checked on this generation, so match your own engine code and gearbox before ordering; the carmaker's own numbers are not quoted in those listings, so check the genuine mount against your VIN if you want a guaranteed match.
Engine Mount — Right (aftermarket)Febi 43704 (auto), Lemförder 3474501 (manual)
Engine Mount — Right front (aftermarket)Original Imperium 37385, Vaico V10-3477 (manual)
Engine Mount — Left front (aftermarket)Febest ADM-8K, Vaico V10-6479
Genuine (OE) numberNot quoted in the catalogue listings — mounts differ by engine and gearbox, so order the genuine ones against your VIN
Fitment notesThe listing above shows examples for the engines checked; petrol, diesel, manual and automatic versions often use different mounts, and cars usually have more than one mount.

The job the mountings do on the Q5

Engine mounts secure the engine and transmission to the chassis while absorbing vibration and movement, preventing that vibration from transferring directly into the cabin. Most versions of the Q5 use several mounts working together — typically at least one on each side of the engine plus a torque mount — and a single failed mount can throw off the whole assembly's balance.

Watch: replacing it

🎬 Watch: Engine Mount Replacement On Audi A4, A5, Q5 - 2009-17 - Step-By-Step

Watch on YouTube ↗
Audi Q5 Engine Mount reference plate
Find Audi Q5 Engine Mount Here!

Opens live listings in a new tab.

Mounting faults after recent engine work

If you've recently had engine work done, documented cases on related Audi models describe engine mount bolts shearing off entirely while driving in the months following work that required removing a mount, with the theory being it wasn't properly resecured afterward.

A persistent clunk has, in documented cases, been traced not to a worn mount at all, but simply to a mounting bolt that had come loose, with re-tightening resolving it entirely at no cost.

Also, these mounts typically contain a silicone fluid that acts as a damper, and if this leaks out over time, the mount can eventually separate if left unaddressed.

What wear feels like on the Q5, and what to fit

These are the same regardless of make or model — see our full Engine Mount Guide for warning signs to watch for (including some make-specific quirks in how they show up), confirming fitment against your VIN, and which aftermarket approach is worth trusting.

The same part on other models

The same part, covered across other Audi models.