Car Parts Guide
REAR SPRINGS BMW X3 · PARTS GUIDE

BMW X3 Rear Springs: Specs, Fitment & Common Faults

Confirmed by suspension specialists: the rear springs come off without a spring compressor, but matching the right spring to your suspension type matters more than it might seem.

BMW X3 (G01 2018 ON) rear coil spring, free length 341 mm, aftermarket Kilen 51139 Illustration for editorial purposes
Find BMW X3 Rear Springs Here!

Opens live listings in a new tab.

OEM Part Number: confirm via VIN

Aftermarket coils: Kilen 51139 / Monroe SP5391

Accuracy note: Covers the BMW X3 (F25 2010-2017) as listed in the UK aftermarket catalogues. Rear coil springs are sold as a pair for the axle and should be replaced as a pair, because a new spring beside a tired one leaves the car sitting unevenly. The right spring depends on the engine and gearbox, the suspension type (standard, sport or heavy-duty) and, on some cars, the body style. The references below are UK aftermarket catalogue listings for this generation, labelled by brand with the fitment details the catalogue gives; carmakers rarely publish the genuine number against these, so match a genuine spring against your VIN if you want a guaranteed fit. It's not recommended to upgrade only the springs while keeping standard shocks — the M Sport suspension is a matched system, and stiffer springs paired with standard-valved shocks will likely produce a harsh, bouncy ride and premature shock wear.
Rear coil springs (aftermarket)Kilen 51139; Monroe SP5391 (electronic damping, 341 mm); Sachs 992502 (M technology); Lesjöfors 4208546
Genuine (OE) numbers quotedNone quoted in the catalogue listings — the genuine spring varies by engine, suspension type and body style, so order it against your VIN
Standard suspension, RWDa different spring from the xDrive version below, and from the M Sport spring further down — confirm drivetrain and suspension type before ordering
Standard suspension, xDriveA different spring from the RWD version above, reflecting the different rear axle layout needed for the AWD driveline
M Sport spring (passive or Adaptive M)A different, stiffer spring from Standard — shared between passive M Sport and Adaptive M suspension, since the electronic system adjusts damping rather than spring rate
Self-levelling (pneumatic/air spring), where fittedA different type of spring entirely from a conventional coil — confirmed by BMW's own parts terminology as a distinct "pneumatic spring" rather than a steel coil

Always replace BMW X3 rear springs in pairs — a single new spring paired with an old, sagged one on the other side creates an uneven ride height and handling bias.

The X3's coils and dampers, explained

Unlike the front strut, the rear spring on this platform is a separate component from the shock absorber and doesn't need a spring compressor to remove or install — a more DIY-friendly job than the front. That said, spring rates and lengths vary significantly based on suspension type (Standard, M Sport, Adaptive M) and drivetrain (RWD vs xDrive), so it's worth matching the part number from your original spring or verifying against your VIN rather than assuming from trim badge alone.

While Adaptive M suspension uses electronically adjustable shocks, the coil springs themselves are fixed and are typically the same stiffer springs used in the passive M Sport suspension — so an Adaptive M car's springs aren't a unique third variant, but Standard-suspension springs still won't match either M-suspension type.

What a cracked coil does to the X3's ride height

The most common sign of a failing rear spring is uneven ride height or gradual sagging — one corner of the car sitting visibly lower than the other, or the entire rear end looking lower than normal, well before any dramatic failure.

Before you buy: suspension type (Standard/M Sport/Adaptive M) and drivetrain (RWD/xDrive) both affect spring rate and length. Always confirm against your VIN before ordering.
Watch: replacing them

🎬 Watch: EASY WAY - BMW Rear knock ? Broken Spring! How to Replace BMW X3 F25

Watch on YouTube ↗

This video is of an earlier generation of the same model; the job is similar but the spring seats and fixings can differ slightly.

BMW X3 Rear Springs reference plate

Coils and dampers working together on the X3

The BMW X3's rear coil spring supports the weight of the car's rear end and absorbs the initial impact of a bump, working alongside the shock absorber (which controls the spring's rate of compression and rebound) rather than replacing its function. A sagged or broken spring lowers ride height, can affect headlight aim, and in severe cases is an MOT failure item.

Find BMW X3 Rear Springs Here!

Opens live listings in a new tab.

Warning signs, DIY difficulty and aftermarket advice

These are the same regardless of make or model — see our full Rear Springs Guide for symptoms of a failing spring, confirming fitment against your VIN, and OEM vs aftermarket guidance.

The same part on other models

The same part, covered across other BMW models.