Citroen C4 Cactus Rear Bumper: Fitment, Sensors & Common Damage
On the C4 Cactus, a simple, free camera fix: oxidised connector pins, resolved just by disconnecting and reconnecting — plus a real cost-saving towbar tip.
Opens live listings in a new tab.
OEM Part Number: confirm via VIN
No aftermarket cover listed for this generation
| Rear bumper covers (aftermarket) | No complete aftermarket cover listed for this generation — order genuine against your VIN or use a used panel in your colour |
|---|---|
| Lower sections, corners & trims | None listed separately |
| Genuine (OE) numbers quoted | None quoted in the catalogue listings — the genuine cover varies by body style, parking sensors and tow bar, so order it against your VIN |
| Fitment notes | Match body style, facelift date and the holes for parking sensors or exhaust trims; covers come primed and need painting to your paint code before fitting. |
A free fix for an intermittent camera on the C4 Cactus
If your reversing camera works intermittently or shows no picture at all, the connector behind the camera can develop a thin layer of oxidisation on its pins simply from ordinary ambient moisture over time. Disconnecting the connector and reconnecting it firmly is often enough to clean the pins through simple contact friction and restore a reliable connection, resolving the fault entirely without needing any parts replaced.
The trailer control module does more than provide power to the socket — it interfaces with the car's stability system to disable rear parking sensors and apply a specific towing driving programme when a trailer is detected. This is a reason to insist on a proper wiring kit rather than a basic splice.
The tech built into the back
What looks like a simple panel swap on the Citroen C4 Cactus often isn't, since rear bumpers on current cars typically integrate parking sensors, a reversing camera mount, and occasionally exhaust trim — all of which need transferring or replacing alongside the bumper itself.
Watch: replacing itThe sequence is much the same on this generation: wheel-arch liner screws, the fixings along the boot aperture and under the lower edge, then unclip each corner from the wing and unplug any sensor loom before the cover comes away.
Sensors, lights and impact protection
Beyond absorbing minor impacts, the rear bumper on higher trims of the C4 Cactus often houses parking sensors, a reversing camera, and sometimes integrated exhaust finishers. A bumper that looks compatible can still be missing the correct cutouts or wiring provisions for your specific trim's equipment.
Generations, Derivatives and Colour| Mk1 (2014–2018), standard trims | The rear bumper is also styled differently on this trim |
|---|---|
| C4 Cactus W special edition | A genuine limited-run combining Pearl White bodywork with Dune-coloured Airbumps, white door mirrors and unique white alloy wheels |
| Mk2/facelift (2017–2020) | Polar White, Sport Red, Tapenade Grey — Airbump panels were significantly redesigned and shrunk compared to the original, different bumper styling |
Opens live listings in a new tab.
These are the same regardless of make or model — see our full Rear Bumper Guide for common damage types, confirming fitment (body style and sensor equipment matter here), and OEM vs aftermarket guidance.
The same part on other modelsThe same part, covered across other Citroen models.