Car Parts Guide
REAR SHOCK ABSORBER Fiat 500 Classic · PARTS GUIDE

Fiat 500 Classic Rear Shock Absorber: Specs, Fitment & Common Faults

Worth confirming first: drivetrain and left/right side both affect which rear shock fits.

Fiat 500 Classic (2007 ON) rear shock absorber, gas, telescopic, aftermarket Monroe G1083 Illustration for editorial purposes
Find Fiat 500 Classic Rear Shock Absorber Here!

Opens live listings in a new tab.

OEM Part Number: confirm via VIN

Aftermarket rear dampers: Monroe G1083 / Febi Bilstein 1002326

Accuracy note: Covers the Fiat 500 Classic (2007- petrol 500) as listed in the UK aftermarket catalogues. Rear shock absorbers are replaced as a pair across the axle, because a new damper beside a worn one leaves the car feeling uneven. The right one depends on the engine, the suspension type (standard, sport or heavy-duty, and electronic damping on some models) and sometimes the body style. The references below are UK aftermarket catalogue listings for this generation, labelled by brand with the fitment details the catalogue gives; carmakers rarely publish the genuine number against these, so match a genuine damper against your VIN if you want a guaranteed fit. Left and right rear shocks are separate, non-mirror-image part numbers — confirm which side you need before ordering.
Rear shock absorbers (aftermarket)Monroe G1083 (gas, telescopic); Febi Bilstein 1002326 (gas, telescopic); Meyle 2267250010 (gas, telescopic)
Genuine (OE) numbers quotedNone quoted in the catalogue listings — the genuine damper varies by engine, suspension type and body style, so order it against your VIN
Front-wheel drive, righta different part number from the left-side shock, and from the AWD version below
Front-wheel drive, leftA different reference from the right-side shock above
AWD, right/leftdifferent references from the front-wheel-drive shocks, reflecting the different rear axle layout

One-sided replacement can leave mismatched damping across the Fiat 500 Classic's axle, which is why doing shock absorbers in pairs is the more consistent choice, even with just one visibly failed.

Three variables behind the right damper for the 500 Classic

A detail worth getting right on the Fiat 500 Classic: rear shocks differ by side (left and right are not mirror-image parts), and AWD models, where available, use an entirely different rear shock from front-wheel-drive versions to suit their different rear axle layout.

How fading dampers change the way the 500 Classic drives

The Fiat 500 Classic's front end tends to dominate suspension conversations since it steers the car, but rear shock wear happens at a comparable rate — just with subtler warning signs that often get blamed on road noise until they're too obvious to ignore.

Before you buy: drivetrain and left/right side both affect fitment. Always confirm against your VIN before ordering.
Watch: replacing it

🎬 Watch: Fiat 500 Rear Shock Absorber (Struts) Replacement Step-By-Step Guide(2007+)

Watch on YouTube ↗
Fiat 500 Classic Rear Shock Absorber reference plate

How a telescopic damper controls the 500 Classic's springs

On the Fiat 500 Classic, how quickly the rear suspension compresses and rebounds over bumps comes down to the shock absorber, a separate function from the coil spring. Wear here shows up as excessive bounce that doesn't settle quickly after a bump.

Find Fiat 500 Classic Rear Shock Absorber Here!

Opens live listings in a new tab.

Warning signs, DIY difficulty and aftermarket advice

These are the same regardless of make or model — see our full Rear Shock Absorber Guide for symptoms of a worn shock, confirming fitment against your VIN, and OEM vs aftermarket guidance.

The same part on other models

The same part, covered across other Fiat models.