Car Parts Guide
REAR SHOCK ABSORBER Fiat 500L · PARTS GUIDE

Fiat 500L Rear Shock Absorber: Specs, Fitment & Common Faults

Worth confirming first: drivetrain and left/right side both affect which rear shock fits.

Fiat 500L (2012 ON) rear shock absorber, gas, telescopic, aftermarket Monroe G2235 Illustration for editorial purposes
Find Fiat 500L Rear Shock Absorber Here!

Opens live listings in a new tab.

OEM Part Number: confirm via VIN

Aftermarket rear dampers: Monroe G2235 / Sachs 317487

Accuracy note: Covers the Fiat 500L (2012-) as listed in the UK aftermarket catalogues. Rear shock absorbers are replaced as a pair across the axle, because a new damper beside a worn one leaves the car feeling uneven. The right one depends on the engine, the suspension type (standard, sport or heavy-duty, and electronic damping on some models) and sometimes the body style. The references below are UK aftermarket catalogue listings for this generation, labelled by brand with the fitment details the catalogue gives; carmakers rarely publish the genuine number against these, so match a genuine damper against your VIN if you want a guaranteed fit. Left and right rear shocks are separate, non-mirror-image part numbers — confirm which side you need before ordering.
Rear shock absorbers (aftermarket)Monroe G2235 (gas, telescopic); Sachs 317487 (gas, telescopic); Febi Bilstein 1002453 (gas, telescopic)
Genuine (OE) numbers quotedNone quoted in the catalogue listings — the genuine damper varies by engine, suspension type and body style, so order it against your VIN
Front-wheel drive, righta different part number from the left-side shock, and from the AWD version below
Front-wheel drive, leftA different reference from the right-side shock above
AWD, right/leftdifferent references from the front-wheel-drive shocks, reflecting the different rear axle layout

Best practice on the Fiat 500L is to change shock absorbers as a pair, even if only one side is visibly the problem, to keep damping matched side to side.

How drive type changes the damper on the 500L

It's easy to assume the Fiat 500L's left and right rear shocks are interchangeable, but they're separate, non-mirror-image parts — and where AWD is offered, it uses a different rear shock from the front-wheel-drive version, due to its different rear axle layout.

The quiet work the 500L's back-end dampers do

On the Fiat 500L, most attention (and most complaints) go to the front suspension because of its role in steering, yet the rear shocks wear on a similar timeline — just more quietly, easy to write off as road noise until it's obviously gotten worse.

Before you buy: drivetrain and left/right side both affect fitment. Always confirm against your VIN before ordering.
Watch: replacing it

🎬 Watch: How to Replace Rear Shock Absorbers Step-by-Step (DIY Repair Guide)

Watch on YouTube ↗

This is a general walkthrough for the job rather than one for your exact model, so access and fixings can differ on your car.

Fiat 500L Rear Shock Absorber reference plate

Oil, gas and valves: inside the 500L's back dampers

Working independently of the coil spring, the Fiat 500L's rear shock absorber determines how quickly the suspension settles after a bump. A worn unit lets the back of the car bounce for longer than it should.

Find Fiat 500L Rear Shock Absorber Here!

Opens live listings in a new tab.

Warning signs, DIY difficulty and aftermarket advice

These are the same regardless of make or model — see our full Rear Shock Absorber Guide for symptoms of a worn shock, confirming fitment against your VIN, and OEM vs aftermarket guidance.

The same part on other models

The same part, covered across other Fiat models.