Car Parts Guide
FRONT BUMPER Fiat 500L · PARTS GUIDE

Fiat 500L Front Bumper: Fitment, Sensors & Common Damage

On the 500L, parking sensor wiring uses the same cable type known to cause issues elsewhere on this platform.

Fiat 500L (2012 ON) front bumper, primed, aftermarket Prasco FT0401001 Illustration for editorial purposes
Find Fiat 500L Front Bumper Here!

Opens live listings in a new tab.

OEM Part Number: confirm via VIN

Aftermarket covers: Prasco FT0401001 / Van Wezel 1609574

Accuracy note: Covers the Fiat 500L (2012-) as listed in the UK aftermarket catalogues. A front bumper is a body-coloured plastic skin, so what you buy is a primed cover that still needs painting to your paint code, and the right one depends on body style, trim, facelift date and the holes moulded into it for parking sensors, fog lights, headlamp washers or a tow eye cover. A cover without the right holes cannot be drilled accurately at home. The references below are UK aftermarket catalogue listings for this generation, labelled by brand with the fitment details the catalogue gives; carmakers rarely publish the genuine number against these, so order a genuine cover against your VIN if you want a guaranteed match. The splitters, outer sections and trims listed separately are the parts most often sold on their own after a car-park knock.
Front bumper covers (aftermarket)Prasco FT0401001 (primed); Prasco FT0441001 (primed); Van Wezel 1609574 (primed); Diederichs 3405650; Blic 5510-00-2013903Q (from 09.2012 to 06.2017)
Splitters, outer sections & trimsPrasco FT0421011 (primed, lower section, Trekking trim); Prasco FT0421001 (primed, upper section, Trekking trim)
Genuine (OE) numbers quotedNone quoted in the catalogue listings — the genuine cover varies by body style, trim, parking sensors and fog lights, so order it against your VIN
Fitment notesMatch body style, trim, facelift date and the holes for parking sensors, fog lights and washer jets; covers come primed and need painting to your paint code before fitting.

Sensor faults on the 500L and the shared wiring

If you're facing a "parking sensors unavailable" message, the wiring used for parking sensors has been documented as using the same type of cable known to cause issues elsewhere on this platform, where the insulation can break down and cause a short circuit, or the wire can short against the body if the rubber grommet protecting it becomes damaged.

One case saw a dealer quote replacing both the body computer and the Parktronic control unit, stating they couldn't guarantee the cheaper unit would work unless the more expensive one was also replaced — despite the owner suspecting a simple earth wire issue instead.

Wax or dirt filling the small gaps on the sensor faces can cause the entire system to stop working, since the sensors rely on inaudible sound waves.

The parts hiding behind the 500L's front cover

Even a low-speed knock to the Fiat 500L's front bumper can be more involved to fix than it looks, since it usually integrates parking sensors, adaptive cruise radar, and fog light housings — all needing attention beyond a plain panel replacement.

Watch: replacing it

🎬 Watch: HOW TO: Remove + Install Front Bumper (Fiat 500)

Watch on YouTube ↗

This video shows a closely related car on the same platform, so the clips and fixings can differ slightly on yours.

Fiat 500L Front Bumper reference plate
Before you buy: bumper specification varies significantly by trim, particularly around parking sensor cutouts, radar mounting points and fog light provisions. Always confirm against your VIN before ordering.

The job the front cover does on the 500L

Beyond absorbing minor impacts, the front bumper on higher trims of the 500L often houses parking sensors, the radar sensor used for adaptive cruise control, and fog lights. A bumper that looks compatible can still be missing the correct cutouts or mounting provisions for your specific trim's equipment.

Generations and Colour
Standard trimsPasodoble Red is the no-cost default colour on the 500L — unlike the standard 500, where Bossa Nova White is free; Bossa Nova White and other shades are technically listed as paid options
Dolcevita special editionBossa Nova White and Lunar Grey are the two colours paired with this trim's chrome details and glass sunroof; a two-tone livery is also optionally available
Find Fiat 500L Front Bumper Here!

Opens live listings in a new tab.

Common damage, DIY difficulty and aftermarket advice

These are the same regardless of make or model — see our full Front Bumper Guide for common damage types to check for, confirming fitment against your VIN, and the sensor-calibration risk with cheap aftermarket covers.

The same part on other models

The same part, covered across other Fiat models.