Car Parts Guide
FRONT BUMPER Fiat 500X · PARTS GUIDE

Fiat 500X Front Bumper: Fitment, Sensors & Common Damage

On the 500X, parking sensor wiring uses the same cable type known to cause issues elsewhere on this platform.

Fiat 500X (2015 ON) front bumper, primed, aftermarket Prasco FT0601001 Illustration for editorial purposes
Find Fiat 500X Front Bumper Here!

Opens live listings in a new tab.

OEM Part Number: confirm via VIN

Aftermarket covers: Prasco FT0601001 / Van Wezel 1618575

Accuracy note: Covers the Fiat 500X (2015-) as listed in the UK aftermarket catalogues. A front bumper is a body-coloured plastic skin, so what you buy is a primed cover that still needs painting to your paint code, and the right one depends on body style, trim, facelift date and the holes moulded into it for parking sensors, fog lights, headlamp washers or a tow eye cover. A cover without the right holes cannot be drilled accurately at home. The references below are UK aftermarket catalogue listings for this generation, labelled by brand with the fitment details the catalogue gives; carmakers rarely publish the genuine number against these, so order a genuine cover against your VIN if you want a guaranteed match. The splitters, outer sections and trims listed separately are the parts most often sold on their own after a car-park knock.
Front bumper covers (aftermarket)Prasco FT0601001 (primed, City Look trim); Van Wezel 1618575 (primed, with parking sensor holes); Van Wezel 1618574 (primed); Van Wezel 1704574 (primed); Diederichs 3425850 (primed)
Splitters, outer sections & trimsVan Wezel 1618576 (primed, upper section, Cross trim); Van Wezel 1618577 (primed, with parking sensor holes, upper section, Cross trim)
Genuine (OE) numbers quotedNone quoted in the catalogue listings — the genuine cover varies by body style, trim, parking sensors and fog lights, so order it against your VIN
Fitment notesMatch body style, trim, facelift date and the holes for parking sensors, fog lights and washer jets; covers come primed and need painting to your paint code before fitting.

A wiring link behind a sensors-unavailable message

If you're facing a "parking sensors unavailable" message, the wiring used for parking sensors has been documented as using the same type of cable known to cause issues elsewhere on this platform, where the insulation can break down and cause a short circuit, or the wire can short against the body if the rubber grommet protecting it becomes damaged.

One case saw a dealer quote replacing both the body computer and the Parktronic control unit, stating they couldn't guarantee the cheaper unit would work unless the more expensive one was also replaced — despite the owner suspecting a simple earth wire issue instead.

Wax or dirt filling the small gaps on the sensor faces can cause the entire system to stop working, since the sensors rely on inaudible sound waves.

Why the 500X's front cover is part of the safety system

There's more hidden in the Fiat 500X's front bumper than most people expect: parking sensors, adaptive cruise control radar, and fog light housings are all routinely integrated, complicating what would otherwise be a simple replacement after minor impact damage.

Watch: replacing it

🎬 Watch: HOW TO: Remove + Install Front Bumper (Fiat 500)

Watch on YouTube ↗

This video shows a closely related car on the same platform, so the clips and fixings can differ slightly on yours.

Fiat 500X Front Bumper reference plate
Before you buy: bumper specification varies significantly by trim, particularly around parking sensor cutouts, radar mounting points and fog light provisions. Always confirm against your VIN before ordering.

The front-end structure of the 500X, explained

Beyond absorbing minor impacts, the front bumper on higher trims of the 500X often houses parking sensors, the radar sensor used for adaptive cruise control, and fog lights. A bumper that looks compatible can still be missing the correct cutouts or mounting provisions for your specific trim's equipment.

Generations and Colour
Standard trimsBossa Nova White, Rock 'n' Roll Blue, Colosseum Grey, Passion Red
Connect trimBody-coloured door mirrors and 17-inch alloys distinguish this trim from lower grades
Find Fiat 500X Front Bumper Here!

Opens live listings in a new tab.

Common damage, DIY difficulty and aftermarket advice

These are the same regardless of make or model — see our full Front Bumper Guide for common damage types to check for, confirming fitment against your VIN, and the sensor-calibration risk with cheap aftermarket covers.

The same part on other models

The same part, covered across other Fiat models.