Fiat 500X Brake Pads: Specs, Fitment & Wear Symptoms
On the 500X, Fiat's own service department acknowledged a known rear disc brake issue on the Sport variant, claiming to be "building a solution."
Opens live listings in a new tab.
OEM Part Number: 77369311 (as quoted in catalogue listings — confirm via VIN) — aftermarket front pads Brembo P 23 165 / Bosch 0 986 494 941
| Front brake pads (aftermarket) | Brembo P 23 165 (155 x 59/65 x 19 mm, acoustic warning with 2 indicators, ATE/Teves/Continental system); ATE 13.0460-7311.2 (155.1 x 64.7/59.4 x 19.2 mm, acoustic warning, ATE/Teves/Continental system); Ferodo FDB4953 (155 x 59.2/64.7 mm, acoustic warning, ATE/Teves/Continental system); Textar 2216501 (141 x 63.3 x 20.1 mm, acoustic warning with 2 indicators, Mando system); Brembo P 23 164 (141 x 63 x 21 mm, acoustic warning with 2 indicators, Mando system); ATE 13.0460-5662.2 (140.8 x 63.3 x 20.4 mm, acoustic warning, Mando system); Bosch 0 986 494 941 (140.8 x 64.2 x 20.1 mm, integrated wear sensor) |
|---|---|
| Pad sizes & variants | Two front families are listed: 155 x 59-65 x 18-19 mm for ATE/Teves/Continental calipers and 141 x 63-64 x 20-21 mm for Mando calipers. |
| Genuine (OE) numbers quoted | Ashika 50-09-923 quotes OE 77369311 |
| Fitment notes | The pad size depends on whether the car has ATE or Mando calipers |
Recurring squeal on Fiat's 500X, and what owners were told
If you're facing recurring, persistent brake noise despite proper cleaning and servicing, one case on a related model saw Fiat's own service department directly acknowledge a known issue with rear disc brakes on the Sport variant, stating they were "building a solution" — yet the owner heard nothing further well over a year later, despite repeated visits, callipers replaced, and discs skimmed each time.
Note too that the vast majority of brake noise is harmless, typically caused simply by the pad vibrating slightly within the caliper — a small amount of appropriate adhesive or copper grease on the back of the pad is the standard fix.
One of the few truly universal partsEvery version of the 500X uses brake pads that wear down through normal use — the only real variable is how quickly, which depends on engine, trim, and (where fitted) whether the car has any form of regenerative braking to ease the load.
Watch: replacing themRenegade shares the 500X platform; no 500X-specific front-brake video found
How braking works on the 500X, pads first
Brake pads clamp against the discs to convert the car's momentum into heat, slowing it down. On any version of the 500X with hybrid assistance or regenerative braking, this system handles a meaningful share of everyday slowing, which can extend pad life compared with a purely petrol or diesel equivalent.
The pad sizes found on the 500X
| 1.4 petrol and lower-power variants, front pads | Sized to match the 281mm disc/caliper on this tier. Pad size scales with engine output and trim on this model, not just the disc diameter — always confirm the exact pad against your VIN rather than assuming from generation alone. |
|---|---|
| Higher-power/AWD variants, front pads | a different, larger pad to match the 305mm disc/caliper on this higher tier — not interchangeable with the standard-tier pad on the same axle. |
| Rear pads, higher-power/AWD variants | Sized to match the 278mm disc/caliper on this tier. Pad size scales with engine output and trim on this model, not just the disc diameter — always confirm the exact pad against your VIN rather than assuming from generation alone. |
Opens live listings in a new tab.
These are the same regardless of make or model — see our full Brake Pads Guide for warning signs to watch for, confirming fitment against your VIN, and R90-certified aftermarket brands worth trusting.
The same part on other modelsThe same part, covered across other Fiat models.