Fiat Tipo Brake Pads: Specs, Fitment & Wear Symptoms
On the Tipo, Fiat's own service department acknowledged a known rear disc brake issue on the Sport variant, claiming to be "building a solution."
Opens live listings in a new tab.
OEM Part Number: confirm via VIN — front pads (aftermarket) Brembo P 23 170 / Bosch 0 986 424 042
| Front brake pads (aftermarket) | Brembo P 23 170 (133 x 59 x 19 mm, acoustic warning with 2 indicators, Mando system, WVA 22397/22398/22399); ATE 13.0460-5679.2 (132.8 x 58.5 x 19.6 mm, acoustic warning with 2 indicators, Mando system); TRW GDB2151 (132.9 x 56.5 x 19.2 mm, acoustic warning, Mando restriction); Brembo P 23 178 (151 x 58 x 20 mm, acoustic warning with 2 indicators, Bosch system, WVA 22476/22477/23713); ATE 13.0460-3878.2 (150.8 x 57.4 x 19.5 mm, acoustic warning, Bosch system); Bosch 0 986 424 042 (150.7 x 57.5 x 19.3 mm, integrated wear sensor, WVA 22476); Ferodo FDB5138 (151 wide x 19.2 mm, acoustic warning with 2 indicators, Bosch system) |
|---|---|
| Pad sizes & variants | Two front families are listed: about 133 x 57-59 x 19 mm for Mando calipers and about 151 x 57-58 x 19-20 mm for Bosch calipers (the larger brakes). |
| Genuine (OE) numbers quoted | None quoted in catalogue listings — order genuine pads against your VIN |
| Fitment notes | Pad size depends on the caliper maker (Mando or Bosch) |
Why a quiet fix for the Tipo can be hard to find
If you're facing recurring, persistent brake noise despite proper cleaning and servicing, one case on a related model saw Fiat's own service department directly acknowledge a known issue with rear disc brakes on the Sport variant, stating they were "building a solution" — yet the owner heard nothing further well over a year later, despite repeated visits, callipers replaced, and discs skimmed each time.
Also, the vast majority of brake noise is harmless, typically caused simply by the pad vibrating slightly within the caliper — a small amount of appropriate adhesive or copper grease on the back of the pad is the standard fix.
One of the few truly universal partsEvery version of the Tipo uses brake pads that wear down through normal use — the only real variable is how quickly, which depends on engine, trim, and (where fitted) whether the car has any form of regenerative braking to ease the load.
Watch: replacing themTipo pads; axle not stated in title; Italian alt with front confirmed: https://www.youtube.com/watch?v=nOuwknSjP4M (Sostituzione pastiglie freni anteriori Fiat Tipo 356 1.6 Multijet II)
What happens at the pads when the Tipo brakes
Brake pads clamp against the discs to convert the car's momentum into heat, slowing it down. On any version of the Tipo with hybrid assistance or regenerative braking, this system handles a meaningful share of everyday slowing, which can extend pad life compared with a purely petrol or diesel equivalent.
Sizes to expect when buying pads for the Tipo
| Front pad, most 1.0/1.4/1.6 variants (sold as a pair) | Sized to match the 281mm disc/caliper on this tier. Pad size scales with engine output and trim on this model, not just the disc diameter — always confirm the exact pad against your VIN rather than assuming from generation alone. |
|---|---|
| Alternative front pad reference | a different, larger pad to match the 284mm disc/caliper on this higher tier — not interchangeable with the standard-tier pad on the same axle. |
| Rear pads, most variants | Sized to match the 251mm disc/caliper on this tier. Pad size scales with engine output and trim on this model, not just the disc diameter — always confirm the exact pad against your VIN rather than assuming from generation alone. |
Opens live listings in a new tab.
These are the same regardless of make or model — see our full Brake Pads Guide for warning signs to watch for, confirming fitment against your VIN, and R90-certified aftermarket brands worth trusting.
The same part on other modelsThe same part, covered across other Fiat models.