Ford Focus Mk3 Cabin Air Filter: Intervals, Fitment & Warning Signs
Access differs by Focus generation — here's the notoriously tight Mk3 method versus the simpler design on later cars.
Opens live listings in a new tab.
OEM Part Number: confirm via VIN
Aftermarket pollen filters: Bosch 1987435018 / Filtron K1350
| Cabin filter, standard (aftermarket) | Bosch 1987435018, Filtron K1350, Corteco 80001772, Denso DCF471P |
|---|---|
| Activated-carbon version (aftermarket) | Bosch 0 986 628 638, Filtron K 1350A, Febi 37049 |
| Genuine (OE) number | Not quoted in the catalogue listings — the fitted filter varies by trim and build date, so order the genuine one against your VIN |
| Fitment notes | Standard and carbon filters have different numbers, and the right size depends on trim and build date. Check which type your car was built with before ordering. |
Ford recommends replacing this filter roughly every 12 months or 15,000 miles. The upgraded activated-carbon version fits in exactly the same place and is worth the small extra cost if you regularly drive in heavy traffic or notice exhaust smells entering the cabin.
Access changes by generation, so check before starting
The Mk3 Focus (roughly 2011-2018) has a notoriously tight access point: the filter sits vertically behind the glovebox area, and reaching it means removing a soft trim panel plus a hard plastic cover, generally with a Torx T20 or T25 driver. Because the filter sits vertically and the floorboard is in the way, it won't slide out in a straight line — you'll need to gently compress or "accordion" the filter to work it free of the slot, and note the airflow arrow on the old filter before discarding it (on the Mk3, air generally flows from front to rear). Later Focus models moved to a considerably more user-friendly, traditional location directly behind the glovebox — simply dropping the glovebox door down on its side dampeners gives direct access to the filter tray, no trim removal required. If your Focus feels unexpectedly awkward to access compared to a guide you're following, checking which generation the guide actually covers is worth doing first.
A quick job that makes the Focus Mk3 nicer to sit in
On the Ford Focus Mk3, this part sits in an unusual category: neglecting it changes nothing about how the car drives, so there's no natural prompt to replace it. It only affects the air you're breathing inside the cabin, which is why it's so often left well past its interval.
What the pollen filter catches before air reaches the Focus Mk3 cabin
Every bit of air blown through the Ford Focus Mk3's cabin vents passes through this filter first, which is what traps dust and pollen — plus some odours and pollutants if it's an activated-carbon type. It has nothing to do with the engine air filter, a wholly separate component built for the combustion side of things.
Opens live listings in a new tab.
These are the same regardless of make or model — see our full Cabin Air Filter Guide for signs it needs changing, confirming fitment against your VIN, and choosing standard, carbon, or HEPA media.
The same part on other modelsThe same part, covered across other Ford models.