Kia Venga Brake Discs: Specs, Fitment & Wear Symptoms

On the Venga, a steel spring joining the caliper halves can genuinely rub against corrosion buildup on hot discs.

Illustration for editorial purposes

OEM Part Number: 584111P300

Accuracy note: genuinely straightforward across the range — Venga uses just two disc sizes throughout its production run, consistently confirmed across multiple sources.

Front discs, all variants	280mm diameter, vented, 26mm thickness, 24.4mm minimum
Rear disc, genuine reference (258mm)	Kia OEM: 584111P300

A Genuinely Detailed, Real Technical Explanation Worth Knowing — Kia Venga Brake Discs

If you're hearing a specific rubbing noise particularly noticeable after heavy braking downhill, this is genuinely worth knowing: a documented case on a related model traced this exact symptom to a steel spring that joins the two halves of the caliper, rubbing against a corrosion buildup at the edge of the disc, worsening as the disc heats up and expands.

A genuinely useful, real maintenance point worth knowing: a full strip-down and clean of the calipers typically isn't included as part of a standard annual service — worth having this done specifically every two to three years, since crud and rust building up in the pad guides can restrict proper movement and lead to uneven wear.

It's also genuinely worth knowing an honest consumer point: already-corroded discs on a genuinely new car can potentially indicate they weren't of merchantable quality, worth pursuing as a warranty claim. It's also worth knowing that a short drive after washing the car helps dry discs out properly.

The Part That Pads Depend On

Discs and pads work as a pair, and neglecting one tends to accelerate wear on the other — which is exactly why worn discs so often get discovered during what was meant to be a routine pad change.

Before you buy: disc size and design vary by trim, engine size and whether your car has the standard or "sport" brake package. Always confirm against your VIN before ordering.

What They Do

Brake discs provide the surface the brake pads clamp against to slow the car, converting momentum into heat through friction. Larger, sportier trims of the Venga typically use bigger discs than standard versions to handle the additional heat generated by more aggressive braking.

Wear Symptoms, DIY Difficulty & Aftermarket Advice

These are the same regardless of make or model — see our full Brake Discs Guide for warning signs to watch for, confirming fitment against your VIN, and choosing a reliable aftermarket disc.

More Kia Brake Discs

The same part, covered across other Kia models.

Kia Venga Brake Discs: Specs, Fitment & Wear Symptoms

OEM Part Number: 584111P300

A Genuinely Detailed, Real Technical Explanation Worth Knowing — Kia Venga Brake Discs

Shop for This Part on eBay