Car Parts Guide
REAR BUMPER Land Rover Defender · PARTS GUIDE

Land Rover Defender Rear Bumper: Fitment, Sensors & Common Damage

The actual wire colours at the reverse light switch didn't match the official wiring diagram at all in one case — plus a tip for mounting a retrofitted camera inside the tailgate to avoid constant lens cleaning.

Land Rover Defender (L663 2020 ON) rear bumper Illustration for editorial purposes
Find Land Rover Defender Rear Bumper Here!

Opens live listings in a new tab.

OEM Part Number: confirm via VIN

No aftermarket cover listed for this generation

Accuracy note: Covers the Land Rover Defender (L663 2020-) as listed in the UK aftermarket catalogues. A rear bumper is a body-coloured plastic skin, so what you buy is a primed cover that still needs painting to your paint code, and the right one depends on body style, facelift date and the holes moulded into it for parking sensors, a tow bar cut-out or exhaust trims — a cover without the sensor holes cannot be drilled accurately at home. The references below are UK aftermarket catalogue listings for this generation, labelled by brand with the fitment details the catalogue gives; carmakers rarely publish the genuine number against these, so order a genuine cover against your VIN if you want a guaranteed match. The lower sections, corner pieces and trims listed separately are the parts most often sold on their own after a car-park knock.
Rear bumper covers (aftermarket)No complete aftermarket cover listed for this generation — order genuine against your VIN or use a used panel in your colour
Lower sections, corners & trimsNone listed separately
Genuine (OE) numbers quotedNone quoted in the catalogue listings — the genuine cover varies by body style, parking sensors and tow bar, so order it against your VIN
Fitment notesMatch body style, facelift date and the holes for parking sensors or exhaust trims; covers come primed and need painting to your paint code before fitting.

Sensors, cameras and brackets: what sits in the Defender's tail

Kerb damage to the Land Rover Defender's rear bumper is common, but the repair often isn't as simple as it looks: it houses parking sensors, a reversing camera, and sometimes exhaust trim finishers, all of which complicate what would otherwise be a straightforward panel replacement.

Before you buy: bumper specification varies significantly by trim, particularly around parking sensor cutouts and camera housings. Always confirm against your VIN before ordering.

How the Defender's back assembly protects the car

Beyond absorbing minor impacts, the rear bumper on higher trims of the Defender often houses parking sensors, a reversing camera, and sometimes integrated exhaust finishers. A bumper that looks compatible can still be missing the correct cutouts or wiring provisions for your specific trim's equipment.

Watch: replacing it

🎬 Watch: Land Rover Defender L663 Rear Bumper Strip Down - Repair / Replace / Upgrade

Watch on YouTube ↗

The sequence is much the same on this generation: wheel-arch liner screws, the fixings along the boot aperture and under the lower edge, then unclip each corner from the wing and unplug any sensor loom before the cover comes away.

Land Rover Defender Rear Bumper reference plate
Generations and Colour
Current generation (2020–present)Fuji White (no-cost solid), Pangea Green and Gondwana Stone (named after ancient supercontinents), Santorini Black, Tasman Blue — a Santorini Black contrast roof is available on Fuji White
Find Land Rover Defender Rear Bumper Here!

Opens live listings in a new tab.

Wiring diagrams that don't match the reverse light circuit

If you're tracing wiring for the reverse light circuit yourself, one case found the actual wire colours at the reverse light switch connector didn't match the official wiring diagram at all, with green and green/brown documented but black and black/white actually found in practice. It's worth testing with a multimeter to confirm which wire is actually live in reverse, rather than assuming the documented colours will match exactly what you find on your specific car.

Mounting the camera inside the tailgate, such as below the high-level brake light, rather than externally, has been documented as a practical way to avoid the lens constantly getting dirty from road spray, since the rear window wiper keeps the glass clean instead.

The camera unit itself is often just a "dumb" camera, with the on-screen grid lines and graphics generated by a separate module — if the image works but the grid lines are missing, this points toward the module rather than the camera unit itself.

Common damage, DIY difficulty and aftermarket advice

These are the same regardless of make or model — see our full Rear Bumper Guide for common damage types, confirming fitment (body style and sensor equipment matter here), and OEM vs aftermarket guidance.

The same part on other models

The same part, covered across other Land Rover models.