Land Rover Freelander 2 Rear Bumper: Fitment, Sensors & Common Damage
A repaired camera on related models has been documented returned set to the wrong display mode entirely.
Opens live listings in a new tab.
OEM Part Number: confirm via VIN
Aftermarket covers: Prasco LR7181051
| Rear bumper covers (aftermarket) | Prasco LR7181051 (Rear, primed, with holes for parking sensors) |
|---|---|
| Lower sections, corners & trims | None listed separately |
| Genuine (OE) numbers quoted | None quoted in the catalogue listings — the genuine cover varies by body style, parking sensors and tow bar, so order it against your VIN |
| Fitment notes | Match body style, facelift date and the holes for parking sensors or exhaust trims; covers come primed and need painting to your paint code before fitting. |
Sensors, cameras and brackets: what sits in the Freelander 2's tail
The Land Rover Freelander 2's rear bumper is rarely just a bumper — parking sensors, a reversing camera housing, and sometimes exhaust trim finishers are commonly built into it, so even minor kerb damage can turn a simple swap into a bigger job.
What sits behind the paint at the back of the Freelander 2
Beyond absorbing minor impacts, the rear bumper on higher trims of the Freelander 2 often houses parking sensors, a reversing camera, and sometimes integrated exhaust finishers. A bumper that looks compatible can still be missing the correct cutouts or wiring provisions for your specific trim's equipment.
Watch: replacing itThe sequence is much the same on this generation: wheel-arch liner screws, the fixings along the boot aperture and under the lower edge, then unclip each corner from the wing and unplug any sensor loom before the cover comes away.
| All generations | Fuji White, Santorini Black, Stornoway Grey, Rimini Red |
|---|
Opens live listings in a new tab.
A repaired camera that still isn't right
If a repaired reversing camera doesn't seem to be working correctly, documented cases on related Land Rover models describe a repaired camera being returned set to the wrong display mode entirely, worth confirming it's showing the correct mode before leaving the workshop.
Also, mounting a retrofitted camera inside the tailgate rather than externally avoids constant lens cleaning from road spray.
Common damage, DIY difficulty and aftermarket adviceThese are the same regardless of make or model — see our full Rear Bumper Guide for common damage types, confirming fitment (body style and sensor equipment matter here), and OEM vs aftermarket guidance.
The same part on other modelsThe same part, covered across other Land Rover models.