Land Rover Discovery Sport Rear Bumper: Fitment, Sensors & Common Damage
A repaired camera came back set to the wrong mode entirely, showing towing mode instead of parking — plus a clarification that missing grid lines point to a separate module, not the camera itself, and an honest note this fix is hit and miss.
Opens live listings in a new tab.
OEM Part Number: confirm via VIN
No aftermarket cover listed for this generation
| Rear bumper covers (aftermarket) | No complete aftermarket cover listed for this generation — order genuine against your VIN or use a used panel in your colour |
|---|---|
| Lower sections, corners & trims | None listed separately |
| Genuine (OE) numbers quoted | None quoted in the catalogue listings — the genuine cover varies by body style, parking sensors and tow bar, so order it against your VIN |
| Fitment notes | Match body style, facelift date and the holes for parking sensors or exhaust trims; covers come primed and need painting to your paint code before fitting. |
More than plastic: what a repair at the back of the Discovery Sport involves
The Land Rover Discovery Sport's rear bumper routinely integrates parking sensors, a reversing camera housing and sometimes exhaust trim finishers, which means replacing it after even minor kerb damage often involves more than a straightforward swap.
The job the back panel does on the Discovery Sport
Beyond absorbing minor impacts, the rear bumper on higher trims of the Discovery Sport often houses parking sensors, a reversing camera, and sometimes integrated exhaust finishers. A bumper that looks compatible can still be missing the correct cutouts or wiring provisions for your specific trim's equipment.
Watch: replacing itThe sequence is much the same on this generation: wheel-arch liner screws, the fixings along the boot aperture and under the lower edge, then unclip each corner from the wing and unplug any sensor loom before the cover comes away.
| L550 (2014–2019) | Fuji White, Santorini Black, Indus Silver, Namib Orange |
|---|---|
| L550 facelift (2019–present) | Fuji White, Santorini Black, Eiger Grey, Firenze Red, Varesine Blue, Hakuba Silver |
Opens live listings in a new tab.
After a camera repair: check this before driving off
If the reversing camera has just come back from a repair, one case saw a repaired camera returned set to towing mode rather than the correct parking mode, displaying only a single guide line instead of the full parking grid, with the owner struggling to change this back despite checking the manual and searching for a solution. It's worth confirming the camera is showing the correct display mode for how you actually use the car before leaving the workshop, since this specific mode setting isn't always straightforward to change yourself afterward.
This kind of missing grid, reversed image fault has been documented by multiple owners, with the manufacturer having reportedly changed the camera unit's design at one point to try to address it — but this fix has been described as hit and miss, with some owners finding it didn't resolve the issue at all, or that it stopped working again after a period of time.
Common damage, DIY difficulty and aftermarket adviceThese are the same regardless of make or model — see our full Rear Bumper Guide for common damage types, confirming fitment (body style and sensor equipment matter here), and OEM vs aftermarket guidance.
The same part on other modelsThe same part, covered across other Land Rover models.