Car Parts Guide
REAR SPRINGS Land Rover Freelander 2 · PARTS GUIDE

Land Rover Freelander 2 Rear Springs: Specs, Fitment & Common Faults

This model uses a conventional coil spring at the rear regardless of trim — no air suspension option exists on this smaller platform.

Illustration of a rear coil spring Illustration for editorial purposes
Find Land Rover Freelander 2 Rear Springs Here!

Opens live listings in a new tab.

A Conventional Coil Spring, With Genuine Suspension-Type Variants

Genuinely worth knowing: this model uses a conventional steel coil spring at the rear across the range — unlike the larger Discovery/Defender/Range Rover models, there's no air suspension option here. That doesn't mean every spring is identical, though: Standard (Passive) and Adaptive Dynamics suspension types use different spring rates to suit their different damping characteristics.

Land Rover Freelander 2 Rear Springs: A Part That Fails Quietly, Then Suddenly

On the Land Rover Freelander 2, rear spring sag tends to creep in gradually over months, with little more than a slightly lower ride height to show for it, before ending suddenly at the coil's end with an audible clunk — worth remembering if one rear corner starts sitting noticeably lower than the other.

Before you buy: Standard vs Adaptive Dynamics suspension type affects spring rate and fitment. Always confirm against your VIN before ordering.
Land Rover Freelander 2 Rear Springs reference plate

Land Rover Freelander 2 Rear Springs: OEM Part Number

Accuracy note: genuinely worth knowing: rear springs are sold in left/right pairs matched to a specific rate marking — confirm the marking on your existing spring rather than assuming from trim alone.
Standard (Passive) suspension, standard rateGenuinely a different spring from the Adaptive Dynamics version below — confirm suspension type before ordering
Adaptive Dynamics suspensionA genuinely different spring rate from the standard passive version, matched to the electronic damping characteristics

The Land Rover Freelander 2's rear springs should always go in as a pair — fitting one new spring alongside an old, sagged one on the opposite side leaves the car sitting unevenly and biases how it handles.

Land Rover Freelander 2 Rear Springs: What It Does

On the Land Rover Freelander 2, supporting the rear end's weight and absorbing the first impact of a bump is the rear coil spring's job, working alongside the shock absorber rather than doing its job for it. A sagged or broken spring drops ride height, can throw off headlight aim, and in serious cases fails an MOT outright.

Find Land Rover Freelander 2 Rear Springs Here!

Opens live listings in a new tab.

Land Rover Freelander 2 Rear Springs: Warning Signs, DIY Difficulty & Aftermarket Advice

These are the same regardless of make or model — see our full Rear Springs Guide for symptoms of a failing spring, confirming fitment against your VIN, and OEM vs aftermarket guidance.

More Land Rover Rear Springs

The same part, covered across other Land Rover models.