Land Rover Range Rover Evoque Rear Springs: Specs, Fitment & Common Faults
This model uses a conventional coil spring at the rear regardless of trim — no air suspension option exists on this smaller platform.
Opens live listings in a new tab.
OEM Part Number: confirm via VIN
Aftermarket coils: Monroe SP4502 / Suplex 28182
| Rear coil springs (aftermarket) | Monroe SP4502 (356 mm); Monroe SP4503 (343 mm); Monroe SP4501 (354 mm); Suplex 28182 (349 mm) |
|---|---|
| Genuine (OE) numbers quoted | None quoted in the catalogue listings — the genuine spring varies by engine, suspension type and body style, so order it against your VIN |
| Standard (Passive) suspension, standard rate | a different spring from the Adaptive Dynamics version below — confirm suspension type before ordering |
| Adaptive Dynamics suspension | A different spring rate from the standard passive version, matched to the electronic damping characteristics |
A single new rear spring on the Land Rover Range Rover Evoque, next to an old, sagged one, creates an imbalance — uneven ride height and a handling bias — which is why replacing them as a pair is the better approach.
Steel coils and their variants on the Range Rover Evoque
Worth knowing: this model uses a conventional steel coil spring at the rear across the range — unlike the larger Discovery/Defender/Range Rover models, there's no air suspension option here. That doesn't mean every spring is identical, though: Standard (Passive) and Adaptive Dynamics suspension types use different spring rates to suit their different damping characteristics.
Why coils break more often in the UK, and the Range Rover Evoque
A sagging Land Rover Range Rover Evoque rear spring rarely gives dramatic warning — just a slightly reduced ride height over several months — before eventually failing suddenly at the coil's end with an audible clunk. Keep an eye out for one rear corner sitting lower than the other as an early tell.
Why the Range Rover Evoque's coils matter for handling and braking
On the Land Rover Range Rover Evoque, bearing the rear end's weight and cushioning the initial jolt of a bump is the coil spring's role, complementing the shock absorber rather than duplicating its job. When it sags or breaks, ride height drops, headlight aim can be thrown off, and severe cases can mean an MOT failure.
Opens live listings in a new tab.
These are the same regardless of make or model — see our full Rear Springs Guide for symptoms of a failing spring, confirming fitment against your VIN, and OEM vs aftermarket guidance.
The same part on other modelsThe same part, covered across other Land Rover models.