Mercedes-Benz A-Class Fuel Pump: Specs, Fitment & Common Faults
On the A-Class, a confirmed genuine safety recall addresses the low-pressure fuel pump's impeller deforming due to a manufacturing defect, causing the pump to shut down and the engine to stall suddenly while driving.
Opens live listings in a new tab.
OEM Part Number: A2464701494
As quoted in catalogue listings, confirm via VIN. Aftermarket units: Bosch 0 580 454 093 / Hüco 132737
| Fuel pumps / feed units (aftermarket) | Hüco 132737 (complete feed unit with sender, petrol); Hüco 133411 (complete feed unit with sender, petrol); Hüco 133525 (complete feed unit with sender, petrol); Hüco 133155 (complete feed unit with sender, petrol); VDO 2803580306302 (complete feed unit, petrol, with reserve sensor); Hüco 132740 (complete feed unit with sender, diesel); Astemo 2502740 (complete feed unit with sender, diesel); Hella 8TF 358 146-101 (complete feed unit with sender, 4 pins, qualified fitting required) |
|---|---|
| Types & variants | Petrol and diesel W176 units are separate complete swirl-pot modules with sender. The petrol side has four Hüco modules plus the VDO original-equipment pattern, split by engine (1.6 M270 against 2.0 M270 and A 45) and by front or 4Matic tank; the diesel side (1.5 OM607 and 1.8/2.1 OM651) uses the Hüco 132740 / Astemo 2502740 unit, which is a low-pressure feed unit with sender rather than a high-pressure pump. Metzger 2250678 (7 pins, with sender) and Topran 410 537 (6 pins, swirl pot and lever sensor) are the budget equivalents, and Maxgear 43-0186 is a mechanical gear-type diesel feed pump. |
| Genuine (OE) numbers quoted | A2464701494 (Meat & Doria 77853); 170429F500 (Hoffer 7506416). No other Mercedes numbers quoted. |
| Fitment notes | Order by fuel and by drive (front or 4Matic), as the modules are not interchangeable. The complete modules replace the sender with the pump; only the Bosch 0 580 454 093 and Bosch 0 580 203 00Y are bare pumps for refitting into the original housing. Hüco units carry assembly instructions that must be followed. |
Spluttering under load on the A-Class
On the Mercedes-Benz A-Class, few faults pick a worse moment to happen than this one, which has a habit of leaving drivers stranded mid-journey rather than failing safely at home. Catching the early signs gives you a head start before that happens to you.
On the Mercedes-Benz A-Class, fuel reaches the engine at the pressure combustion needs thanks to the fuel pump, which draws it straight from the tank. It sits submerged inside the tank itself, and that positioning is a big part of why replacement takes more effort than the part's size would suggest.
In-tank and high-pressure pumps across the A-Class range
| W176 (2012–2018) & W176 A45 AMG, all petrol (M270/M133) | Petrol: typically a single in-tank low-pressure pump; some later or higher-output variants may add a separate engine-mounted high-pressure pump for direct injection — confirm your exact engine |
|---|---|
| W176/W177, all diesel (OM651/OM654/OM608) | Diesel: in-tank lift pump feeds a separate engine-mounted high-pressure injection pump (common rail) — never interchangeable with the petrol pump |
| W177 (2018–present), all petrol (M282/M260) | Petrol: typically a single in-tank low-pressure pump; some later or higher-output variants may add a separate engine-mounted high-pressure pump for direct injection — confirm your exact engine |
| W177 A35 AMG & A45 S AMG (2019–present), 2.0 turbo (M139) | Petrol: typically a single in-tank low-pressure pump; some later or higher-output variants may add a separate engine-mounted high-pressure pump for direct injection — confirm your exact engine |
Closest video found; the in-tank module comes out the same way under the rear seat or boot floor
Opens live listings in a new tab.
Checking the A-Class for open fuel system recalls
This is important to check directly: a confirmed recall covering many 2021-2023 models directly addresses the in-tank low-pressure fuel pump, where the pump's impeller can deform due to a manufacturing defect. Once deformed, the impeller can come into contact with its housing, creating resistance that shuts the pump down entirely and causes the engine to stall — a safety concern, since this can happen suddenly while driving. Worth checking your specific VIN against the official recall register directly.
Bear in mind that this recalled low-pressure pump is a separate component from the engine-mounted high-pressure fuel pump, worth confirming which specific pump has actually failed before purchasing replacement parts.
Warning signs, DIY difficulty and aftermarket adviceThese are the same regardless of make or model — see our full Fuel Pump Guide for symptoms to watch for (including the low-pressure vs high-pressure distinction on direct-injection engines), confirming fitment against your VIN, and OE suppliers worth knowing.
The same part on other modelsThe same part, covered across other Mercedes-Benz models.