Car Parts Guide
REAR SPRINGS Mercedes-Benz CLA · PARTS GUIDE

Mercedes-Benz CLA Rear Springs: Specs, Fitment & Common Faults

No AIRMATIC option on this model — every version uses a conventional steel rear coil spring, but that doesn't mean every spring is the same.

Illustration of a rear coil spring Illustration for editorial purposes
Find Mercedes-Benz CLA Rear Springs Here!

Opens live listings in a new tab.

A Straightforward Steel Spring — With Genuine Trim and Drivetrain Variants

Unlike the RWD-based C/E-Class/GLC range, the CLA doesn't offer AIRMATIC air suspension — every version uses a conventional steel rear coil spring. Spring rate still genuinely differs by trim and drivetrain, though: 4MATIC (all-wheel-drive) versions use a different spring from front-wheel-drive variants, and AMG Line/AMG-badged cars use a stiffer spring again.

Mercedes-Benz CLA Rear Springs: A Part That Fails Quietly, Then Suddenly

On the Mercedes-Benz CLA, the typical failure pattern here is gradual sag over months, barely noticeable beyond a marginally lower stance, followed by a sudden break at the coil's end with an audible clunk. If one rear corner appears to be sitting lower than the other, that's worth investigating.

Before you buy: drivetrain and trim both affect spring rate and fitment. Always confirm against your VIN before ordering.
Mercedes-Benz CLA Rear Springs reference plate

Mercedes-Benz CLA Rear Springs: OEM Part Number

Accuracy note: genuinely worth knowing: rear springs are sold in left/right pairs matched to a specific rate marking — confirm the marking on your existing spring rather than assuming from trim alone.
Front-wheel drive, standard rateGenuinely a different spring from the 4MATIC and AMG versions below — confirm drivetrain and trim before ordering
4MATIC (all-wheel drive)A genuinely different spring from the front-wheel-drive version, reflecting the different rear axle layout
AMG Line/AMG, where fittedA genuinely different, stiffer spring from standard trims

Fitting the Mercedes-Benz CLA's rear springs one at a time tends to backfire: pairing a fresh spring with a sagged original on the other side leaves the car sitting unevenly and biases handling to one side.

Mercedes-Benz CLA Rear Springs: What It Does

The Mercedes-Benz CLA's rear coil spring carries the weight of the car's back end and takes the first hit from any bump, working alongside — not instead of — the shock absorber. Once it sags or breaks, expect a lower ride height, possible headlight aim issues, and in severe cases, an MOT failure.

Find Mercedes-Benz CLA Rear Springs Here!

Opens live listings in a new tab.

Mercedes-Benz CLA Rear Springs: Warning Signs, DIY Difficulty & Aftermarket Advice

These are the same regardless of make or model — see our full Rear Springs Guide for symptoms of a failing spring, confirming fitment against your VIN, and OEM vs aftermarket guidance.

More Mercedes-Benz Rear Springs

The same part, covered across other Mercedes-Benz models.