Car Parts Guide
REAR SPRINGS Mercedes-Benz E-Class · PARTS GUIDE

Mercedes-Benz E-Class Rear Springs: Specs, Fitment & Common Faults

On AIRMATIC cars, there's no conventional coil spring at the rear at all — an air spring does the job instead.

Mercedes-Benz E-Class (W213 2016 ON) rear coil spring, free length 350 mm, aftermarket KYB RA5967 Illustration for editorial purposes
Find Mercedes-Benz E-Class Rear Springs Here!

Opens live listings in a new tab.

OEM Part Number: confirm via VIN

Aftermarket coils: KYB RA5967 / Sachs 992386

Accuracy note: Covers the Mercedes-Benz E-Class (W213 2016-) as listed in the UK aftermarket catalogues. Rear coil springs are sold as a pair for the axle and should be replaced as a pair, because a new spring beside a tired one leaves the car sitting unevenly. The right spring depends on the engine and gearbox, the suspension type (standard, sport or heavy-duty) and, on some cars, the body style. The references below are UK aftermarket catalogue listings for this generation, labelled by brand with the fitment details the catalogue gives; carmakers rarely publish the genuine number against these, so match a genuine spring against your VIN if you want a guaranteed fit. AIRMATIC cars have no conventional coil spring to replace at the rear — the air spring is integrated into the shock assembly and sold as part of that unit, not as a standalone spring.
Rear coil springs (aftermarket)KYB RA5967 (lowered, 350 mm); Sachs 992386 (lowered, 349 mm); Suplex 19560 (lowered, 349 mm); Eibach R23278 (standard, 356 mm)
Genuine (OE) numbers quotedNone quoted in the catalogue listings — the genuine spring varies by engine, suspension type and body style, so order it against your VIN
Standard steel-spring, righta different part number from the left-side spring — confirm side before ordering
Standard steel-spring, leftA different reference from the right-side spring above
Higher Ground Clearance Springs (factory option), where fittedA different, taller spring from the standard-trim version — a distinct factory option code, not a standard part
AIRMATIC, all variantsNo standalone coil spring exists — the air spring is integrated into the rear shock assembly; see the Rear Shock Absorber guide for the correct part

Always replace steel rear springs in pairs — a single new spring paired with an old, sagged one on the other side creates an uneven ride height and handling bias.

Air springs or coils on the E-Class

Important to establish before ordering: standard models use a conventional steel rear coil spring, while AIRMATIC-equipped cars replace it entirely with an air spring integrated into the rear shock assembly — there's no separate steel coil to order on an AIRMATIC car. The existence of genuine aftermarket conversion kits (AIRMATIC to complete strut-and-coil-spring assemblies) confirms just how different these two systems are, rather than one being a stiffer variant of the other.

Mercedes offers factory option codes for Higher Ground Clearance Springs and a Dynamic Handling Package on some variants — genuine, distinct factory-fit springs rather than a standard-trim part, so confirm any special option codes on your build sheet before ordering.

Why spring breakage is common on cars like the E-Class

A conventional rear spring often sags gradually for months without an obvious symptom beyond a slightly lower ride height, then fails suddenly at the coil's end with an audible clunk. On AIRMATIC cars, a failing air spring more commonly shows up as a dashboard suspension warning and the car settling to a lower ride height overnight as air leaks out.

Before you buy: suspension type (standard steel-spring or AIRMATIC), trim, and any special ground-clearance or handling package all affect spring rate and fitment. Always confirm against your VIN before ordering.
Watch: replacing them

🎬 Watch: Mercedes W212 Rear Coil Spring Replace

Watch on YouTube ↗

This video is of an earlier generation of the same model; the job is similar but the spring seats and fixings can differ slightly.

Mercedes-Benz E-Class Rear Springs reference plate

Coils and dampers working together

On standard cars, the rear coil spring supports the weight of the car's rear end and absorbs the initial impact of a bump, working alongside the shock absorber rather than replacing its function. On AIRMATIC cars, an air spring performs this role instead, with the added ability to adjust ride height automatically. A sagged or broken steel spring lowers ride height, can affect headlight aim, and in severe cases is an MOT failure item.

Find Mercedes-Benz E-Class Rear Springs Here!

Opens live listings in a new tab.

Warning signs, DIY difficulty and aftermarket advice

These are the same regardless of make or model — see our full Rear Springs Guide for symptoms of a failing spring, confirming fitment against your VIN, and OEM vs aftermarket guidance.

The same part on other models

The same part, covered across other Mercedes-Benz models.