Car Parts Guide
FRONT BUMPER Mitsubishi L200 ยท PARTS GUIDE

Mitsubishi L200 Front Bumper: Fitment, Sensors & Common Damage

On the L200, false parking sensor readings on related models are often traced to moisture-related corrosion in the wiring, or a sensor reading its own mounting bracket as an obstacle.

Mitsubishi L200 (2015 ON) front bumper, aftermarket Prasco MB8241011 Illustration for editorial purposes
Find Mitsubishi L200 Front Bumper Here!

Opens live listings in a new tab.

OEM Part Number: confirm via VIN

Aftermarket covers: Prasco MB8241011 / Van Wezel 3298570

Accuracy note: Covers the Mitsubishi L200 (2015-) as listed in the UK aftermarket catalogues. A front bumper is a body-coloured plastic skin, so what you buy is a primed cover that still needs painting to your paint code, and the right one depends on body style, trim, facelift date and the holes moulded into it for parking sensors, fog lights, headlamp washers or a tow eye cover. A cover without the right holes cannot be drilled accurately at home. The references below are UK aftermarket catalogue listings for this generation, labelled by brand with the fitment details the catalogue gives; carmakers rarely publish the genuine number against these, so order a genuine cover against your VIN if you want a guaranteed match. The splitters, outer sections and trims listed separately are the parts most often sold on their own after a car-park knock.
Front bumper covers (aftermarket)Prasco MB8241011; Prasco MB8261001; Prasco MB8241001; Prasco MB8261021 (primed); Van Wezel 3298570
Splitters, outer sections & trimsNone listed separately
Genuine (OE) numbers quotedNone quoted in the catalogue listings โ€” the genuine cover varies by body style, trim, parking sensors and fog lights, so order it against your VIN
Fitment notesMatch body style, trim, facelift date and the holes for parking sensors, fog lights and washer jets; covers come primed and need painting to your paint code before fitting.

What a low-speed bump at the front can damage on the L200

The Mitsubishi L200's front bumper routinely integrates parking sensors, adaptive cruise control radar, and fog light housings, which means replacing it after even minor impact damage often involves more than a straightforward swap.

Before you buy: bumper specification varies significantly by trim, particularly around parking sensor cutouts, radar mounting points and fog light provisions. Always confirm against your VIN before ordering.

The front-end structure of the L200, explained

Beyond absorbing minor impacts, the front bumper on higher trims of the L200 often houses parking sensors, the radar sensor used for adaptive cruise control, and fog lights. A bumper that looks compatible can still be missing the correct cutouts or mounting provisions for your specific trim's equipment.

Watch: replacing it

๐ŸŽฌ Watch: Mitsubishi l200 front panel removal repairs strip down and paint

Watch on YouTube ↗
Mitsubishi L200 Front Bumper reference plate
Generations and Colour
All generationsWhite Diamond, Graphite Grey, Impulse Blue, Titanium Grey โ€” White Diamond is shared across most of Mitsubishi's range including the Outlander and Eclipse Cross, using the same paint code
Find Mitsubishi L200 Front Bumper Here!

Opens live listings in a new tab.

Phantom readings from the L200's sensors

If parking sensors keep giving false readings despite the bumper looking clean, documented cases on related Mitsubishi models describe moisture causing corrosion within the sensor wiring connectors, or a sensor pushed slightly out of alignment within the bumper cover, causing it to detect the edge of its own mounting bracket rather than anything near the car. Both usually require the bumper to be removed to properly inspect, clean, or reseat the sensor.

On related components across this platform โ€” worth checking your specific VIN against the official recall register, given this apparent pattern.

Bumper trim panels supplied ready-painted in the correct colour have been documented costing around ยฃ180 from Mitsubishi, worth using as a rough comparison point when getting quotes for cosmetic bumper damage.

Common damage, DIY difficulty and aftermarket advice

These are the same regardless of make or model โ€” see our full Front Bumper Guide for common damage types to check for, confirming fitment against your VIN, and the sensor-calibration risk with cheap aftermarket covers.

The same part on other models

The same part, covered across other Mitsubishi models.