Mitsubishi L200 Rear Shock Absorber: Specs, Fitment & Common Faults
Worth knowing: the L200's rear suspension is a leaf-spring live axle, a completely different architecture from the coil-spring independent rear suspension used on most passenger cars.
Opens live listings in a new tab.
OEM Part Number: confirm via VIN
Aftermarket rear dampers: Monroe D8950S / Bilstein 24-278683
| Rear shock absorbers (aftermarket) | Monroe D8950S (gas, telescopic); Bilstein 24-278683 (gas); Maxgear 11-1337 (gas) |
|---|---|
| Genuine (OE) numbers quoted | None quoted in the catalogue listings — the genuine damper varies by engine, suspension type and body style, so order it against your VIN |
| Standard-duty shock | The factory-fit specification — a different part from the heavy-duty version below |
| Heavy-duty shock | A different, uprated part aimed at load-carrying and towing use — not interchangeable with the standard-duty version despite fitting the same mounting points |
The Mitsubishi L200's shock absorbers should always be replaced in pairs.
Leaf springs and a live axle, not coil-sprung independence
Important to establish before ordering: the L200's rear shock absorber works alongside a leaf-spring live axle rather than a coil-spring independent rear suspension. The shock absorber's role here is purely to control the rate of compression and rebound — the leaf springs themselves handle both the springing and the axle location, with no separate control arms or trailing links in the design. Standard-duty and heavy-duty (uprated load capacity) shock absorbers are different, non-interchangeable parts, reflecting the L200's role as a working vehicle with varying load requirements.
Why the L200's rear end gets overlooked until it wallows
On the Mitsubishi L200, steering duties mean the front suspension usually gets checked first, but rear shocks wear out too — just more quietly, with early symptoms that are easy to mistake for ordinary road noise until they get noticeably worse.
The job of each shock at the back of the L200
The rear shock absorber controls how quickly the rear suspension compresses and rebounds over bumps. On the L200's leaf-spring live axle, the shock's job is purely damping — the leaf springs themselves provide the springing action and locate the axle, a different division of labour from a coil-spring independent rear suspension.
Opens live listings in a new tab.
These are the same regardless of make or model — see our full Rear Shock Absorber Guide for symptoms of a worn shock, confirming fitment against your VIN, and OEM vs aftermarket guidance.
The same part on other modelsThe same part, covered across other Mitsubishi models.