Car Parts Guide
REAR SPRINGS Peugeot 108 · PARTS GUIDE

Peugeot 108 Rear Springs: Specs, Fitment & Common Faults

A part that fails quietly, then suddenly — sagging gradually before a sudden, audible failure.

Peugeot 108 (2014 ON) rear coil spring, free length 324 mm, aftermarket Kilen 51449 Illustration for editorial purposes
Find Peugeot 108 Rear Springs Here!

Opens live listings in a new tab.

OEM Part Number: confirm via VIN

Aftermarket coils: Kilen 51449 / Monroe SP4301

Accuracy note: Covers the Peugeot 108 (2014-) as listed in the UK aftermarket catalogues. Rear coil springs are sold as a pair for the axle and should be replaced as a pair, because a new spring beside a tired one leaves the car sitting unevenly. The right spring depends on the engine and gearbox, the suspension type (standard, sport or heavy-duty) and, on some cars, the body style. The references below are UK aftermarket catalogue listings for this generation, labelled by brand with the fitment details the catalogue gives; carmakers rarely publish the genuine number against these, so match a genuine spring against your VIN if you want a guaranteed fit. Rear springs are sold in left/right pairs matched to a specific rate marking — confirm the marking on your existing spring rather than assuming from trim alone.
Rear coil springs (aftermarket)Kilen 51449; Monroe SP4301 (standard); Suplex 07197 (324 mm); KYB K-Flex RA5216 (311 mm)
Genuine (OE) numbers quotedNone quoted in the catalogue listings — the genuine spring varies by engine, suspension type and body style, so order it against your VIN
Standard rateConfirm your exact generation and side, since PSA Group used multiple distinct rear spring references across most model generations
Estate/higher-load body style, where applicablea stiffer rear spring rate than the equivalent standard body style, to handle the increased load-carrying capacity

It's worth doing the Peugeot 108's rear springs as a pair rather than one at a time — mixing a new spring with an old, sagged one on the opposite side throws off ride height evenly and skews handling.

Spotting a broken coil on the 108 before the MOT does

It's a slow decline followed by a sudden failure with the Peugeot 108's rear springs — a gradually lower ride height for months, then an abrupt break at the coil's end announced by a clunk. One rear corner sitting visibly lower than the other is the sign to watch for.

Before you buy: generation and body style both affect spring rate and fitment. Always confirm against your VIN before ordering.
Watch: replacing them

🎬 Watch: How to change rear springs / rear coil springs on PEUGEOT 107 1 (PM, PN) [TUTORIAL AUTODOC]

Watch on YouTube ↗

This video shows a closely related car on the same platform, so the spring seats and fixings can differ slightly on yours.

Peugeot 108 Rear Springs reference plate

How the coils hold up the back of the 108

On the Peugeot 108, weight support at the rear and absorbing a bump's first impact both fall to the coil spring, working in tandem with the shock absorber rather than substituting for it. A broken or sagged spring drops ride height, can affect headlight alignment, and in bad cases is enough to fail an MOT.

Find Peugeot 108 Rear Springs Here!

Opens live listings in a new tab.

Spotting failure and choosing replacement coils

These are the same regardless of make or model — see our full Rear Springs Guide for symptoms of a failing spring, confirming fitment against your VIN, and OEM vs aftermarket guidance.

The same part on other models

The same part, covered across other Peugeot models.