Peugeot 208 Rear Bumper: Fitment, Sensors & Common Damage
On the 208, a genuine, free fix is worth trying before assuming the reversing camera has failed — plus a real towbar wiring part-number trap worth knowing.
Illustration for editorial purposes
Opens live listings in a new tab.
Peugeot 208 Rear Bumper: OEM Part Number
A Genuine, Free Fix Worth Trying Before Assuming the Camera Has Failed — Peugeot 208 Rear Bumper
If your reversing camera has stopped working, showing a black screen with a warning triangle rather than the reverse view, it's genuinely worth trying a simple, free fix before assuming the camera itself needs replacing: gently prying the camera unit out of its mounting holder by hand (no tools needed), then reseating it back into the wiring loom and holder. One documented case resolved a "no signal" fault entirely this way, with the owner noting no actual repair was involved beyond disconnecting and reconnecting the unit — suggesting the connection had simply worked slightly loose rather than the camera or wiring being genuinely faulty.
It's also worth knowing that some cars have the physical reversing camera connector present in the wiring but genuinely disconnected or inactive from the factory, consistent with the same platform being built both with and without this feature. If you're trying to retrofit a camera, activation typically requires proper diagnostic software (DiagBox) to code the feature on, not just a physical plug-in connection.
Peugeot 208 Rear Bumper: More Than Just a Plastic Panel
It's rarely a plain plastic panel on the Peugeot 208: the rear bumper usually integrates parking sensors and a reversing camera housing, sometimes exhaust trim too, so a seemingly minor kerb scrape can end up needing more than a simple like-for-like swap.
Peugeot 208 Rear Bumper: What It Does
Beyond absorbing minor impacts, the rear bumper on higher trims of the 208 often houses parking sensors, a reversing camera, and sometimes integrated exhaust finishers. A bumper that looks compatible can still be missing the correct cutouts or wiring provisions for your specific trim's equipment.
Peugeot 208 Rear Bumper: Generations, Derivatives & Colour
| Mk1 (2012–2019), standard trims | Bianca White, Aluminium Grey, Nera Black, Ruby Red |
|---|---|
| Mk1 GTi/GTi by Peugeot Sport | Ice Silver and Ice Grey were genuinely unique textured finishes reserved for the GTi range; the GTi by Peugeot Sport special edition offered an exclusive Textured Matt Black/Lacquered Red two-tone not available on any other 208; the rear bumper is also styled differently on this trim |
| Mk2 (2019–present), standard trims | Bianca White (no-cost), Cumulus Grey, Nera Black, Vertigo Blue |
| Mk2 facelift (2023–present) | Introduced Agueda Yellow and Selenium Grey as new shades |
| Mk2 GT | Elixir Red is considered the signature GT shade; the rear bumper is also styled differently on this trim |
Opens live listings in a new tab.
Peugeot 208 Rear Bumper: Common Damage, DIY Difficulty & Aftermarket Advice
These are the same regardless of make or model — see our full Rear Bumper Guide for common damage types, confirming fitment (body style and sensor equipment matter here), and OEM vs aftermarket guidance.
More Peugeot Rear Bumper
The same part, covered across other Peugeot models.