Car Parts Guide
REAR BUMPER Peugeot 508 · PARTS GUIDE

Peugeot 508 Rear Bumper: Fitment, Sensors & Common Damage

On the 508, a free fix is worth trying before assuming the reversing camera has failed — plus a real towbar wiring part-number trap worth knowing.

Peugeot 508 (2011-2018) rear bumper, aftermarket Blic 5506-00-5527950P Illustration for editorial purposes
Find Peugeot 508 Rear Bumper Here!

Opens live listings in a new tab.

OEM Part Number: confirm via VIN

Aftermarket covers: Blic 5506-00-5527950P

Accuracy note: Covers the Peugeot 508 (2011-2018) as listed in the UK aftermarket catalogues. A rear bumper is a body-coloured plastic skin, so what you buy is a primed cover that still needs painting to your paint code, and the right one depends on body style, facelift date and the holes moulded into it for parking sensors, a tow bar cut-out or exhaust trims — a cover without the sensor holes cannot be drilled accurately at home. The references below are UK aftermarket catalogue listings for this generation, labelled by brand with the fitment details the catalogue gives; carmakers rarely publish the genuine number against these, so order a genuine cover against your VIN if you want a guaranteed match. The lower sections, corner pieces and trims listed separately are the parts most often sold on their own after a car-park knock.
Rear bumper covers (aftermarket)Blic 5506-00-5527950P (Rear, from 11.2010, to 09.2014)
Lower sections, corners & trimsNone listed separately
Genuine (OE) numbers quotedNone quoted in the catalogue listings — the genuine cover varies by body style, parking sensors and tow bar, so order it against your VIN
Fitment notesMatch body style, facelift date and the holes for parking sensors or exhaust trims; covers come primed and need painting to your paint code before fitting.

Warning triangle instead of a picture on the 508

If your reversing camera has stopped working, showing a black screen with a warning triangle rather than the reverse view, it's worth trying a simple, free fix before assuming the camera itself needs replacing: gently prying the camera unit out of its mounting holder by hand (no tools needed), then reseating it back into the wiring loom and holder. One case resolved a "no signal" fault entirely this way, with the owner noting no actual repair was involved beyond disconnecting and reconnecting the unit — suggesting the connection had simply worked slightly loose rather than the camera or wiring being faulty.

The correct electrical harness for a towbar is tied to a specific part number, and using one that physically fits but isn't officially listed as compatible for your exact model can cause problems even if it initially seems to work. One case found a towbar correctly matched to the car, but paired with electrics listed as compatible with "caravans and trailers fitted with LED lamps or bulbs" and explicitly not compatible with electric vehicles — while the actually correct harness for that same vehicle was a completely different part number. Always confirm the specific electrics part number is listed as compatible for your exact model and powertrain, not just that the towbar itself fits.

Bear in mind that some cars have the physical reversing camera connector present in the wiring but disconnected or inactive from the factory, consistent with the same platform being built both with and without this feature. If you're trying to retrofit a camera, activation typically requires proper diagnostic software (DiagBox) to code the feature on, not just a physical plug-in connection.

More than plastic: what a repair at the back of the 508 involves

Kerb damage to the Peugeot 508's rear bumper is common, but the repair often isn't as simple as it looks: it houses parking sensors, a reversing camera, and sometimes exhaust trim finishers, all of which complicate what would otherwise be a straightforward panel replacement.

Watch: replacing it

🎬 Watch: How To Remove The Rear Bumper From a Peugeot 508 Sw 2014

Watch on YouTube ↗

Estate body.

Peugeot 508 Rear Bumper reference plate
Before you buy: bumper specification varies significantly by trim, particularly around parking sensor cutouts and camera housings. Always confirm against your VIN before ordering.

How the 508's back assembly protects the car

Beyond absorbing minor impacts, the rear bumper on higher trims of the 508 often houses parking sensors, a reversing camera, and sometimes integrated exhaust finishers. A bumper that looks compatible can still be missing the correct cutouts or wiring provisions for your specific trim's equipment.

Generations, Derivatives and Colour
Standard trimsBianca White, Nera Black, Cumulus Grey, Vertigo Blue
GTThe rear bumper is also styled differently on this trim
Find Peugeot 508 Rear Bumper Here!

Opens live listings in a new tab.

Common damage, DIY difficulty and aftermarket advice

These are the same regardless of make or model — see our full Rear Bumper Guide for common damage types, confirming fitment (body style and sensor equipment matter here), and OEM vs aftermarket guidance.

The same part on other models

The same part, covered across other Peugeot models.