Car Parts Guide
REAR SHOCK ABSORBER Peugeot 208 · PARTS GUIDE

Peugeot 208 Rear Shock Absorber: Specs, Fitment & Common Faults

Worth knowing: PSA Group's extensive platform sharing means this rear shock is often cross-listed with other Peugeot and Citroën models built on the same underpinnings.

Peugeot 208 (2012-2019) rear shock absorber, gas, telescopic, aftermarket Monroe G1177 Illustration for editorial purposes
Find Peugeot 208 Rear Shock Absorber Here!

Opens live listings in a new tab.

OEM Part Number: confirm via VIN

Aftermarket rear dampers: Monroe G1177 / Febi Bilstein 1002393

Accuracy note: Covers the Peugeot 208 (2012-2019) as listed in the UK aftermarket catalogues. Rear shock absorbers are replaced as a pair across the axle, because a new damper beside a worn one leaves the car feeling uneven. The right one depends on the engine, the suspension type (standard, sport or heavy-duty, and electronic damping on some models) and sometimes the body style. The references below are UK aftermarket catalogue listings for this generation, labelled by brand with the fitment details the catalogue gives; carmakers rarely publish the genuine number against these, so match a genuine damper against your VIN if you want a guaranteed fit. Left and right rear shocks are separate, non-mirror-image part numbers — confirm which side you need before ordering.
Rear shock absorbers (aftermarket)Monroe G1177 (gas, telescopic); Febi Bilstein 1002393 (gas, telescopic); Meyle 11-267250015 (gas, telescopic, to 03/2014)
Genuine (OE) numbers quotedNone quoted in the catalogue listings — the genuine damper varies by engine, suspension type and body style, so order it against your VIN
Righta different part number from the left-side shock — confirm side before ordering
LeftA different reference from the right-side shock above

On the Peugeot 208, it's generally worth fitting shock absorbers in pairs rather than one at a time, even if just one side shows obvious signs of failure.

Shared parts across Peugeot, Citroen and DS

Worth knowing when searching for Peugeot 208 parts: PSA Group's platform-sharing extends directly to rear suspension components — many rear shock listings cover multiple Peugeot and Citroën models together under a single part number, reflecting shared underpinnings across the group. If you can't find a listing for your model, checking under a related PSA Group model of a similar era is worth doing.

What the 208 feels like with tired dampers at the back

It's easy to focus entirely on the Peugeot 208's front suspension, since it also does the steering, but the rear shocks age just the same — often with subtler symptoms that get dismissed as road noise right up until they can't be ignored.

Before you buy: generation and left/right side both affect fitment. Always confirm against your VIN before ordering.
Watch: replacing it

🎬 Watch: How to change rear shock absorber on PEUGEOT 208 1 (CA_,CC_)

Watch on YouTube ↗
Peugeot 208 Rear Shock Absorber reference plate

Damping explained, with the 208 as the example

On the Peugeot 208, controlling the speed of rear suspension compression and rebound over bumps is the shock absorber's job, working separately from the coil spring. A worn one means the back end bounces longer than it should after a bump.

Find Peugeot 208 Rear Shock Absorber Here!

Opens live listings in a new tab.

Warning signs, DIY difficulty and aftermarket advice

These are the same regardless of make or model — see our full Rear Shock Absorber Guide for symptoms of a worn shock, confirming fitment against your VIN, and OEM vs aftermarket guidance.

The same part on other models

The same part, covered across other Peugeot models.